Back

Hyster H40-60XT (A380) Warehouse Forklift Maintenance Schedule: Every 500 Hours or 6 Months

Use this recommended maintenance checklist for the for inspection, lubrication, and maintenance for your lift truck. The service intervals are given in both operating hours recorded on the lift truck hour meter, and in calendar time. Use the interval that occurs first.
MaintainX
10/07/2022

Hyster H40-60XT (A380) Warehouse Forklift Maintenance Schedule: Every 500 Hours or 6 Months

Use this recommended maintenance checklist for the for inspection, lubrication, and maintenance for your lift truck. The service intervals are given in both operating hours recorded on the lift truck hour meter, and in calendar time. Use the interval that occurs first.

    Legends: X=Check C=Change L=Lubricate CIL=Check Indicator Light during operation

    TRANSMISSION OIL DIPSTICK

    Procedure or Quantity

    HYDRAULIC OIL

    Procedure or Quantity

    BATTERY AND CABLE TERMINALS

    Procedure or Quantity

    ENGINE OIL Yanmar Engine

    Procedure or Quantity

    ENGINE OIL FILTER Yanmar Engine

    Procedure or Quantity

    DRIVE BELT Yanmar Engine

    Procedure or Quantity

    ENGINE IDLE SPEED Yanmar Engine

    Procedure or Quantity

    ENGINE GOVERNED SPEED (No Load) Yanmar Engine

    Procedure or Quantity

    GASOLINE FUEL FILTER PSI Bi-Fuel Engine

    Procedure or Quantity

    FUEL WATER SEPARATOR FILTER Yanmar Diesel Engine

    Procedure or Quantity

    CLEAN DEBRIS FROM RADIATOR CORE

    Procedure or Quantity

    FORKS

    Procedure or Quantity

    FORK LATCHES

    Procedure or Quantity

    MAST Sliding Surfaces and Load Roller Surfaces

    Procedure or Quantity

    LIFT CHAINS

    Procedure or Quantity

    MAST Pivots

    Procedure or Quantity

    MAST Sideshift Carriage (Upper and Lower Bearing Strips)

    Procedure or Quantity

    MAST Fork Positioner

    Procedure or Quantity

    MAST Fork Positioner Cylinder Rod Anchors

    Procedure or Quantity

    MAST Fork Positioner and Lower Hook Capscrews

    Procedure or Quantity

    TILT CYLINDER ENDS

    Procedure or Quantity

    BRAKE MASTER CYLINDER ROD END PIN

    Procedure or Quantity

    MANUAL HYDRAULIC HAND LEVERS

    Procedure or Quantity

    BRAKE FLUID Master Cylinder

    Procedure or Quantity

    PARKING BRAKE ADJUSTMENT

    Procedure or Quantity

Source: MaintainX (Community Member)

Please note that any procedure, checklist, or other document available in the MaintainX Procedure Hub is provided for general education and information only and does not constitute legal, medical, or financial advice. MaintainX makes the materials available AS IS and AS PROVIDED, without warranties of any kind. By downloading or using any such materials, you assume the risk that they may not be appropriate for your specific situation and agree that you are solely responsible for any such use, including compliance with applicable law and with meeting any conditions of product warranties.