JLG | Scissor Lifts 1932R - Daily Walk-Around Inspection
Walk around inspection checklists are proven to help prevent issues with your rollback carrier. Proper inspections will always lead to better quality of the life of your equipment and reduce costs.
MaintainX
10/13/2022
JLG | Scissor Lifts 1932R - Daily Walk-Around Inspection
Walk around inspection checklists are proven to help prevent issues with your rollback carrier. Proper inspections will always lead to better quality of the life of your equipment and reduce costs.
Begin the “Walk-Around Inspection” at item 1 (refer to Figure 2- 1.). Continue checking each item in sequence for the conditions listed in the following checklist.
WARNING: TO AVOID POSSIBLE INJURY, BE SURE MACHINE POWER IS “OFF”. DO NOT OPERATE UNTIL ALL MALFUNCTIONS HAVE BEEN CORRECTED.
NOTICE: DO NOT OVERLOOK VISUAL INSPECTION OF CHASSIS UNDERSIDE. CHECKING THIS AREA MAY RESULT IN DISCOVERY OF CONDITIONS WHICH COULD CAUSE EXTENSIVE MACHINE DAMAGE.
INSPECTION NOTE: On all components, make sure there are no loose or missing parts, that they are securely fastened, and that no visible damage, leaks or excessive wear exists in addition to any other criteria mentioned.
Frame/Chassis/Ladder
See Inspection Note. Ensure that pothole protection (PHP) components on frame are in place, undamaged, not bent or worn. Side compartment doors open and close properly
Ground Controls
Placard secure and legible, control switches return to neutral position, emergency stop switch functions properly. Control markings legible.
Hydraulic Pump/Motor, Control Valve Installation
No unsupported wires or hoses; no damaged or broken wires. See Inspection Note.
Front Wheels, Tires and Drive Motors - Steer linkage, and Steer Cylinder
See Inspection Note
Battery Compartment
See Inspection Note
Rear Wheels, Tires and Hydraulic Brake
Wheel nut properly secured. Refer to “Tire Wear and Damage” on page 6-16. Inspect wheels for damage and corrosion, check hydraulic brake hoses for damage or leakage. See Inspection Note.
Manual Descent Control
See Inspection Note.
Beacon(s) (If Equipped)
See Inspection Note.
Scissor Arms, Pivot Pins and Sliding Wear Pads, Lift Cylinder
See Inspection Note
Platform/Handrail/Gate/Chain Installation
Deck extension slides in and out and locks in place properly. Gate closes properly. All fold-down rail pins (if equipped) in place and secure. See Inspection Note.
Platform Control Console
Ensure that the control console is firmly secured in the proper location. Placards secure and legible, control lever and switches return to neutral, and emergency stop switch function properly, required manuals in storage box.
Source: MaintainX (Community Member)