LPFK ProtoFlow E Procedure

For the installation of the device

• Take the oven out of the packaging and remove the plastic bag.

• The oven must be place on a flat surface of 400x400 mm. There must be at least 400x250 mm free space in front of the oven for opening the drawer.

• Leave the device unconnected in the working area for such a period that the device adjusts to the temperature conditions in the room.

• connect the power cord to grounded network socket only.

To use the ProtoFlow

• Turn ON the ProtoFlow.

• Open the drawer and install the PCB.

• Adjust the PCB holder to the PCB dimensions and close the drawer.

• Use the arrow to navigate between the menu as in the attach image.

• Use the second attach image to navigate through the menu and configure your profile.

• Start the process

• Insert the PCB after the warmup phase is done

• Open the drawer after the reflow phase is done

• Remove the PCB after the cooldown phase is done