Doosan D15S-5 Pneumatic Forklift 1500 Hours/ 9 Months
The Doosan D15S-5 Pneumatic Forklift 1500 Hours/ 9 Months is a preventive maintenance form done every 9 months that keeps your forklift in prime working condition. Maximize your forklifts capabilities by consistently performing maintenance.
Doosan D15S-5 Pneumatic Forklift 1500 Hours/ 9 Months
The Doosan D15S-5 Pneumatic Forklift 1500 Hours/ 9 Months is a preventive maintenance form done every 9 months that keeps your forklift in prime working condition. Maximize your forklifts capabilities by consistently performing maintenance.
You must read and understand the warnings and instructions contained in the Safety section of this manual, before performing any operation or maintenance procedures.
Drive Axle Oil (Shoe Brake) - Change
See topic, “Drive Axle Oil - Change” in “First 50 - 100 Service Hours”
Inspect Ignition System (LP-Gas, Gasoline & Dual Fuel Engines Only)
G420F(E) Engine
Replace LP Fuel Filter Element (LP-Gas, Dual Fuel Engine Only)
Park the lift truck in an authorized refueling area with the forks lowered, parking brake applied and the transmission in Neutral.
Fuel Filter (LP - Gas Engine Only)
Disassembly
Testing Fuel Lock-off Operation (LP-Gas Engine Only)
NOTE : The length of time the engine runs on trapped fuel vapor increases with any increase in distance between the fuel lock-off and the pressure regulator/converter.
(1) LP fuel lock-off (2) Regulator / couverter (3) Fuel Trim valve (FTV)
Source: Doosan