EMC 110/B10 Electric Walkie Stacker 1000 Hours/6 Months

Check all load bearing elements for damage

Check all bolted connections

Check the transmission for noises and leakage

The quality of the tyres greatly affects the stability and the driving behavior of the fork-lift truck.

Changes must only be made following consultations with the maker.

When replacing wheels or tyres, it must be ensured that the fork-lift truck remains level (tyres and wheels must always be replaced in pairs, i.e. left and right together).

Check the wheel bearings and ensure secure fastening of wheels

Check that the wheel bolts are firmly seated; tighten if necessary

Check the steering bearing play

Swivel the control shaft (12) to the left or the right.

In narrow bends, the control shaft protrudes beyond the truck contour!

Performance and adjustment check

Check the braking function of the gas pressure spring

check the gas pressure spring for leakage and damage

Check for correct functioning, adjustment and wear

Check the fork tines and fork carrier for wear and damage

The lifting and lowering functions are triggered using the control buttons on the control shaft head.

When the lifting function is activated, the pump unit starts up.

Hydraulic oil is pumped from the oil reservoir into the cylinder.

The load lifting device (8) is lifted.

Check all connections for leakage and damage a)

Check hydraulic cylinders for :

leakage
damage
secure attachment

Check the oil level

Check the pressure limiting valves for correct functioning

24 volt system. As a standard feature, the truck is equipped with an electronic drive current control system.

Performance check

Check all cables for secure connection and damage

Check the fuses for correct amperage

Check the warning systems and safety circuits for correct functioning

Check motor for secure attachment

Check the terminals for secure attachment and apply grease

Check battery connections for tight fit

Check the battery cables for damage; renew if necessary

Chassis / superstructure:

Check all load bearing elements for damage

Check all bolted connections

Drive unit:

Check the transmission for noises and leakage

Wheels:

Check for wear and damage

Tyres:

The quality of the tyres greatly affects the stability and the driving behavior of the fork-lift truck.

Changes must only be made following consultations with the maker.

When replacing wheels or tyres, it must be ensured that the fork-lift truck remains level (tyres and wheels must always be replaced in pairs, i.e. left and right together).

Check the wheel bearings and ensure secure fastening of wheels

Check that the wheel bolts are firmly seated; tighten if necessary

Steering / brake system:

Check the steering bearing play

Swivel the control shaft (12) to the left or the right.

In narrow bends, the control shaft protrudes beyond the truck contour!

Performance and adjustment check

Check the braking function of the gas pressure spring

check the gas pressure spring for leakage and damage

Lifting device:

Check for correct functioning, adjustment and wear

Check the fork tines and fork carrier for wear and damage

Hydraulic system:

Performance check

The lifting and lowering functions are triggered using the control buttons on the control shaft head.

When the lifting function is activated, the pump unit starts up.

Hydraulic oil is pumped from the oil reservoir into the cylinder.

The load lifting device (8) is lifted.

Check all connections for leakage and damage a)

Check hydraulic cylinders for :

leakage

damage

secure attachment

Check the oil level

Filler plug for hydraulic oil

Check the pressure limiting valves for correct functioning

Electrical system:

24 volt system. As a standard feature, the truck is equipped with an electronic drive current control system.

Performance check

Check all cables for secure connection and damage

Check the fuses for correct amperage

Check the warning systems and safety circuits for correct functioning

Electric motors:

Check motor for secure attachment

Batteries:

Check the terminals for secure attachment and apply grease

Check battery connections for tight fit

Check the battery cables for damage; renew if necessary