General • Inspections

Kannegiesser Ironer Quarterly PM

Regular ironer maintenance will achieve significant improvements in flatwork productivity, standards of finishing and profitability.

54Q Beaverton OR - Cintas

08/22/2024

Kannegiesser Ironer Quarterly PM

Regular ironer maintenance will achieve significant improvements in flatwork productivity, standards of finishing and profitability.

* LOTO Confirmation Statement - DO NOT EDIT/REMOVE *

All hazardous energy has been isolated using LOTO procedures?

All potential stored or residual energy has been relieved, disconnected, restrained, lowered, and/or otherwise rendered safe?

Lock Out Tag Out

Perform LOTO as necessary

Yes
No
N / A

Food Safety Pre-Check

Prior to performing this maintenance task, the areas that may be impacted unintentionally by the maintenance activities were inspected to assure no Partner’s safety is at risk and no customer product or Cintas equipment would be compromised, contaminated, or otherwise damaged due to this specific task. Any product that may be impacted was moved and / or otherwise isolated to assure protection.

Lubricate roller bearings on exhaust side

Pass
Flag
Fail

Clean exhaust air line. refer to manual pg 147.

1. Remove Side Cover 2. Remove Flange nut 3. Remove hose clips 4. Remove and clean pipe bends and exhaust air hoses.

Pass
Flag
Fail

Remove LOTO and return to service

Food Safety Post-Check

After performing this maintenance task, a review of all applicable areas that may have been impacted was conducted to assure there are no residual risks to Partner safety remaining. Also, a review of all applicable areas to ensure that no customer products were inadvertently compromised, contaminated, or otherwise damaged was conducted. If any conditions were observed indicating that any of the previous concerns have been negatively impacted, the issue was escalated to leadership.

Source: 54Q Beaverton OR - Cintas (Community Member)

Kannegiesser Ironer Quarterly PM

Kannegiesser Ironer Quarterly PM

* LOTO Confirmation Statement - DO NOT EDIT/REMOVE *

All hazardous energy has been isolated using LOTO procedures?

Yes

N/A

All potential stored or residual energy has been relieved, disconnected, restrained, lowered, and/or otherwise rendered safe?

Yes

N/A

Lock Out Tag Out

Perform LOTO as necessary

Food Safety Pre-Check

Lubricate roller bearings on exhaust side

Clean exhaust air line. refer to manual pg 147.

1. Remove Side Cover 2. Remove Flange nut 3. Remove hose clips 4. Remove and clean pipe bends and exhaust air hoses.

Remove LOTO and return to service

Food Safety Post-Check

*** LOTO Confirmation Statement - DO NOT EDIT/REMOVE ***

All hazardous energy has been isolated using LOTO procedures?

Yes

N/A

All potential stored or residual energy has been relieved, disconnected, restrained, lowered, and/or otherwise rendered safe?

Yes

N/A

Lock Out Tag Out

Perform LOTO as necessary

Food Safety Pre-Check

Lubricate roller bearings on exhaust side

Clean exhaust air line. refer to manual pg 147.

1. Remove Side Cover 2. Remove Flange nut 3. Remove hose clips 4. Remove and clean pipe bends and exhaust air hoses.

Remove LOTO and return to service

Food Safety Post-Check

* LOTO Confirmation Statement - DO NOT EDIT/REMOVE *