JLG | Compact Crawler Booms X33JP - Walk-Around Inspection
Walk around inspection checklists are proven to help prevent issues with your Compact Crawler Booms. Proper inspections will always lead to better quality of the life of your equipment and reduce costs. Walk around inspection checklists are proven to help prevent issues with your Compact Crawler Booms. Proper inspections will always lead to better quality of the life of your equipment and reduce costs.
MaintainX
10/13/2022
JLG | Compact Crawler Booms X33JP - Walk-Around Inspection
Walk around inspection checklists are proven to help prevent issues with your Compact Crawler Booms. Proper inspections will always lead to better quality of the life of your equipment and reduce costs. Walk around inspection checklists are proven to help prevent issues with your Compact Crawler Booms. Proper inspections will always lead to better quality of the life of your equipment and reduce costs.
Notice: Do not overlook visual inspection of chassis underside. Checking this area may result in discovery of conditions which could cause extensive machine damage.
General
Begin the "Walk-Around Inspection" at Item 1, as noted on the diagram. Continue checking each item in sequence for the conditions listed in the following checklist.
WARNING: TO AVOID POSSIBLE INJURY, BE SURE MACHINE POWER IS OFF. DO NOT OPERATE MACHINE UNTIL ALL MALFUNCTIONS HAVE BEEN CORRECTED.
INSPECTION NOTE: On all components, make sure there are no loose or missing parts, that they are securely fastened, and no visible damage, leaks or excessive wear exists in addition to any other criteria mentioned.
1. Platform Assembly, Foot Switch, Ladder and Gate
Foot switch in good working order, not modified, disabled or blocked. Manual(s) in storage container, access bar slides up and down properly, platform installed and with both caps screwed on. See Inspection Note.
2. Control Stations
Switches and buttons return to neutral when activated and released, decals/placards secure and legible, control markings legible.
3. Outriggers
See Inspection Note; pads pivot freely
4. Electrical & Hydraulic Cover Assemblies
See Inspection Note.
5. Boom Sections & Turntable
See Inspection Note.
6. Drive Tracks
Properly Adjusted. See Inspection Note.
7. Lithium Ion Battery Pack
Free of debris and see Inspection Note.
8. Swing Drive & Turntable Bearing
Check for proper lubrication. See Inspection Note.
9. Hydraulic Tank
Hydraulic oil level correct and see Inspection Note.
10. Electric Motor or Combustion Engine and Hydraulic Pump
See Inspection Note.
11. Platform Rotator & Machine Bubble Level
See Inspection Note.
Source: MaintainX (Community Member)