Back
General • Inspections

Caterpillar TH360B Telehandler: Maintenance (Every 250 Service Hours)

This maintenance procedure that's done every 250 Service Hours focuses on the cooling system coolant sample. This procedure provides the guidelines for proper sampling of coolant.
MaintainX
08/10/2022

Caterpillar TH360B Telehandler: Maintenance (Every 250 Service Hours)

This maintenance procedure that's done every 250 Service Hours focuses on the cooling system coolant sample. This procedure provides the guidelines for proper sampling of coolant.

    Cooling System Coolant Sample (Level 1) - Obtain

    NOTICE: Always use a designated pump for oil sampling, and use a separate designated pump for coolant sampling. Using the same pump for both types of samples may contaminate the samples that are being drawn. This contaminate may cause a false analysis and an incorrect interpretation that could lead to concerns by both dealers and customers.

    Note: Level 1 results may indicate a need for Level 2 Analysis.

    Use the following guidelines for proper sampling of the coolant:

    • Screenshot2021-02-09at9.26.40AM.png

    Engine Oil Sample - Obtain

    Park the machine on level ground. Fully retract and fully lower the boom. Move the transmission control to the NEUTRAL position and ensure that the parking brake is engaged.

    Illustration 246

    • Screenshot2021-02-09at9.34.45AM.png
Source: MaintainX (Community Member)

Please note that any procedure, checklist, or other document available in the MaintainX Procedure Hub is provided for general education and information only and does not constitute legal, medical, or financial advice. MaintainX makes the materials available AS IS and AS PROVIDED, without warranties of any kind. By downloading or using any such materials, you assume the risk that they may not be appropriate for your specific situation and agree that you are solely responsible for any such use, including compliance with applicable law and with meeting any conditions of product warranties.