General • Inspections

ENERGY STAR® Certified Snap-In Installation Exhaust Fans with LED Light BFQL50 - Use and Care

The ENERGY STAR® Certified Snap-In Installation Exhaust Fans with LED Light BFQL50 - Use and Care ensures the cleanliness of your Exhaust Fan With quick and easy to follow steps on how to clean your exhaust fan safely and properly.

MaintainX

08/19/2022

ENERGY STAR® Certified Snap-In Installation Exhaust Fans with LED Light BFQL50 - Use and Care

CAUTION: MAKE SURE POWER IS SWITCHED OFF AT SERVICE PANEL BEFORE SERVICING THE UNIT.

CAUTION: ALLOW BULB TO COOL BEFORE REPLACING

Changing the Lamp

Remove the light lens by squeezing at the tabs and pulling down
Remove lamp by gently twisting the lamp base counterclockwise while applying outward pressure.
Installation is the reverse of removal.
Replace with Air King model AK6LED40 or a compatible GU24 6 watt LED lamp (models BFQLA50, BFQLA120 - compatible GU24 11.5 watt LED lamp).

Cleaning the Grill

Remove grill and use a mild detergent, such as dishwashing liquid, and dry with a soft cloth.
NEVER USE ANY ABRASIVE PADS OR SCOURING POWDERS.
Completely dry grill before reinstalling.

Cleaning the Fan Assembly

Unplug the motor cord from receptacle. Wipe all parts with a dry cloth or gently vacuum the fan.
NEVER IMMERSE ELECTRICAL PARTS IN WATER. Plug the motor cord back in and restore power.

Source: MaintainX (Community Member)

CAUTION: MAKE SURE POWER IS SWITCHED OFF AT SERVICE PANEL BEFORE SERVICING THE UNIT.

CAUTION: ALLOW BULB TO COOL BEFORE REPLACING

Changing the Lamp

Remove the light lens by squeezing at the tabs and pulling down

Remove lamp by gently twisting the lamp base counterclockwise while applying outward pressure.

Installation is the reverse of removal.

Replace with Air King model AK6LED40 or a compatible GU24 6 watt LED lamp (models BFQLA50, BFQLA120 - compatible GU24 11.5 watt LED lamp).

Cleaning the Grill

Remove grill and use a mild detergent, such as dishwashing liquid, and dry with a soft cloth.

NEVER USE ANY ABRASIVE PADS OR SCOURING POWDERS.

Completely dry grill before reinstalling.

Cleaning the Fan Assembly

Unplug the motor cord from receptacle. Wipe all parts with a dry cloth or gently vacuum the fan.

NEVER IMMERSE ELECTRICAL PARTS IN WATER. Plug the motor cord back in and restore power.