Randell Chick-Fil-A Refrigerated Breading Table Semi-Annual Preventive Maintenance Form

Rubber O-ring Seals Cleaning Procedure

• Loosen and remove 4 bolts in drain valve with 5/16” wrench while holding the nut with 3/8” wrench

• Valve will separate into 3 pieces. Carefully remove o-ring gasket seals for cleaning

• Wipe around sealing area of valve using warm water and mild detergent to remove any debris

• Fit o-ring seals back onto valve components

• Piece valve together, insert bolts, apply nuts, and tighten (do not over-tighten)

• Do not use sharp utensils for any of the above procedures