MEWP PRE-USE INSPECTION CHECKLIST
This complete pre-operation checklist will help you verify that the equipment you will operate is in safe working order; it will also help reduce the risk of injury to you due to defective equipment.
MEWP PRE-USE INSPECTION CHECKLIST
This complete pre-operation checklist will help you verify that the equipment you will operate is in safe working order; it will also help reduce the risk of injury to you due to defective equipment.
MACHINE:
SERIAL No:
WEEK COMMENCING:
THOROUGH EXAMINATION DUE DATE:
Day Examined:
VISUAL CHECKS
Documentation
Wheels/tyres
Engine/power source
Hydraulics
Hoses and cables
Outriggers, stabilisers
Chassis, boom and scissor pack
Platform or cage
Decals and signage
FUNCTION CHECKS
Using Ground (G) and Platform(P) controls
Security device (power isolator, keypad, smart card)
Function enable (ignition key, foot switch, hold to run device)
Emergency stops and emergency lowering system
All switches, function controls (move freely, do not stick)
Lifting functions (raise, lower, slew, tele-out, tele-in)
Travel functions (forward, reverse, steer, brakes)
Elevated drive speed (reduced or prevented)
Lights, beacons, warning devices
Alarms (tilt, descent and travel)
Limit switches (e.g. descent, load, outreach, rotation)
Pothole protection device (fully deploys and retracts)
Oscillating axle locks, extending axles
Accessories, power to platform, extending decks
Jacks-legs, stabilisers, outriggers, levelling devices
ALL FAULTS OR DEFECTS (8) TO BE REPORTED IMMEDIATELY TO YOUR SUPERVISOR
OPERATOR NAME(S) AND PAL CARD NUMBER(S):
Source: MaintainX (Community Member)