Back
General • Inspections

Daikin Maverick II IM 1058-8: Monthly Maintenance

This monthly procedure is for your equipment's control box, cooling circuits and gas furnace. The complete steps on how to check the unit has been given so you can check your unit thoroughly.
MaintainX
08/10/2022

Daikin Maverick II IM 1058-8: Monthly Maintenance

This monthly procedure is for your equipment's control box, cooling circuits and gas furnace. The complete steps on how to check the unit has been given so you can check your unit thoroughly.

    Periodic Clean Water Rinse

    A monthly clean water rinse is recommended for coils that are applied in coastal or industrial environments to help to remove chlorides, dirt and debris. An elevated water temperature (not to exceed 130ºF) will reduce surface tension, increasing the ability to remove chlorides and dirt. Pressure washer PSI must not exceed 900 psig and the nozzel should remain at leat 1 foot from the coil to avoid damaging fin edges.

Source: MaintainX (Community Member)

Please note that any procedure, checklist, or other document available in the MaintainX Procedure Hub is provided for general education and information only and does not constitute legal, medical, or financial advice. MaintainX makes the materials available AS IS and AS PROVIDED, without warranties of any kind. By downloading or using any such materials, you assume the risk that they may not be appropriate for your specific situation and agree that you are solely responsible for any such use, including compliance with applicable law and with meeting any conditions of product warranties.