General • Inspections

Felins Mainline Conveyor Weekly

Conveyor system maintenance is needed to ensure safety and optimal efficiency. Early servicing inspections and repairs can often avoid costly breakdowns and deliver continued efficiencies to extend the life of your conveyor.

54Q Beaverton OR - Cintas

08/22/2024

Felins Mainline Conveyor Weekly

* LOTO Confirmation Statement - DO NOT EDIT/REMOVE *

All hazardous energy has been isolated using LOTO procedures?

All potential stored or residual energy has been relieved, disconnected, restrained, lowered, and/or otherwise rendered safe?

Lock Out Tag Out

LOTO Performed

Yes
No
N / A

Food Safety Pre-Check

Prior to performing this maintenance task, the areas that may be impacted unintentionally by the maintenance activities were inspected to assure no Partner’s safety is at risk and no customer product or Cintas equipment would be compromised, contaminated, or otherwise damaged due to this specific task. Any product that may be impacted was moved and / or otherwise isolated to assure protection.

Inspect belt for integrity and proper tension. Ensure belt tracks correctly adjust as necessary

Pass
Flag
Fail

Inspect overall mechanical and electrical component integrity. Tighten as required.

Pass
Flag
Fail

Inspect chain and sprockets for wear, alignment and proper tension. Adjust or replace as necessary.

Pass
Flag
Fail

Inspect bearings, rollers, motor and gear reducer for integrity.

Pass
Flag
Fail

Verify Photo Eyes are working properly. (Light on back of should turn off when sensor is blocked and back on when unblocked)

Pass
Flag
Fail

Remove LOTO and return to service.

Food Safety Post-Check

After performing this maintenance task, a review of all applicable areas that may have been impacted was conducted to assure there are no residual risks to Partner safety remaining. Also, a review of all applicable areas to ensure that no customer products were inadvertently compromised, contaminated, or otherwise damaged was conducted. If any conditions were observed indicating that any of the previous concerns have been negatively impacted, the issue was escalated to leadership.

Source: 54Q Beaverton OR - Cintas (Community Member)

Felins Mainline Conveyor Weekly

Felins Mainline Conveyor Weekly

* LOTO Confirmation Statement - DO NOT EDIT/REMOVE *

All hazardous energy has been isolated using LOTO procedures?

Yes

N/A

All potential stored or residual energy has been relieved, disconnected, restrained, lowered, and/or otherwise rendered safe?

Yes

N/A

Lock Out Tag Out

LOTO Performed

Food Safety Pre-Check

Inspect belt for integrity and proper tension. Ensure belt tracks correctly adjust as necessary

Inspect overall mechanical and electrical component integrity. Tighten as required.

Inspect chain and sprockets for wear, alignment and proper tension. Adjust or replace as necessary.

Inspect bearings, rollers, motor and gear reducer for integrity.

Verify Photo Eyes are working properly. (Light on back of should turn off when sensor is blocked and back on when unblocked)

Remove LOTO and return to service.

Food Safety Post-Check

*** LOTO Confirmation Statement - DO NOT EDIT/REMOVE ***

All hazardous energy has been isolated using LOTO procedures?

Yes

N/A

All potential stored or residual energy has been relieved, disconnected, restrained, lowered, and/or otherwise rendered safe?

Yes

N/A

Lock Out Tag Out

LOTO Performed

Food Safety Pre-Check

Inspect belt for integrity and proper tension. Ensure belt tracks correctly adjust as necessary

Inspect overall mechanical and electrical component integrity. Tighten as required.

Inspect chain and sprockets for wear, alignment and proper tension. Adjust or replace as necessary.

Inspect bearings, rollers, motor and gear reducer for integrity.

Verify Photo Eyes are working properly. (Light on back of should turn off when sensor is blocked and back on when unblocked)

Remove LOTO and return to service.

Food Safety Post-Check

* LOTO Confirmation Statement - DO NOT EDIT/REMOVE *