Back
Property Management • Inspections

Playground Safety Inspection Form

The primary aim for this procedure is to inspect playground for conditions and defects that could cause injury. To be performed annually in the fall.
Columbus Parks and Maintenance
11/12/2024

Playground Safety Inspection Form

The primary aim for this procedure is to inspect playground for conditions and defects that could cause injury. To be performed annually in the fall.

    Stability and Rigidity Test

    Test the stability and rigidity of all of the following

    Climber

    • Pass
    • Flag
    • Fail

    Swings

    • Pass
    • Flag
    • Fail

    Slides

    • Pass
    • Flag
    • Fail

    Bouncing Rides

    • Pass
    • Flag
    • Fail

    Overall Playground

    • Pass
    • Flag
    • Fail

    Additional Info

    Cracks and Distorted Plastic Test

    I have checked for any cracks or distorted plastic parts.

    Climbers

    • Pass
    • Flag
    • Fail

    Swings

    • Pass
    • Flag
    • Fail

    Slides

    • Pass
    • Flag
    • Fail

    Bouncing Rides

    • Pass
    • Flag
    • Fail

    Overall Playground

    • Pass
    • Flag
    • Fail

    Additional Info

    I have checked for protruding bolts and nuts and have covered them

    I have checked for bent, broken or severely worn pipe and sharp edges on pipes.

    All wood chips are between 9 & 12 inches in depth.

    Review for exposed concrete footings.

    Additional comments

Source: Columbus Parks and Maintenance (Community Member)

Please note that any procedure, checklist, or other document available in the MaintainX Procedure Hub is provided for general education and information only and does not constitute legal, medical, or financial advice. MaintainX makes the materials available AS IS and AS PROVIDED, without warranties of any kind. By downloading or using any such materials, you assume the risk that they may not be appropriate for your specific situation and agree that you are solely responsible for any such use, including compliance with applicable law and with meeting any conditions of product warranties.