End of Day Walk Through
End of Day Inspection Walk Throughs in the work place help prevent incidents, injuries and illnesses. Through a critical examination of the workplace, inspections help to identify and record hazards for corrective action. Health and safety committees can help plan, conduct, report and monitor inspections. Regular workplace inspections are an important part of the overall occupational health and safety program and management system, if present.
End of Day Walk Through
End of Day Inspection Walk Throughs in the work place help prevent incidents, injuries and illnesses. Through a critical examination of the workplace, inspections help to identify and record hazards for corrective action. Health and safety committees can help plan, conduct, report and monitor inspections. Regular workplace inspections are an important part of the overall occupational health and safety program and management system, if present.
Date/Time
Operator
HEATERS
AMERICAN HEATER
Temperature
Set Point
Line PSI
Tank PSI
SMALL HEATER
Temperature
Set Point
PSI
LARGE HEATER
Temperature
Set Point
PSI
NORTH HEATER
Temperature
Set Point
PSI
CHECK SIGHT TUBE ON HEATER EXPANSION TANK FOR OIL LEVEL ON ALL HEATERS
Sight Tube Level OK
HOT OIL BOOSTER PUMPS
AC HOT OIL BOOSTER PUMP
Outlet Temperature
Set Point
EMULSION HOT OIL BOOSTER PUMP
Outlet Temperature
Set Point
RESET IF RED LIGHT IS FLASHING ON BOOSTER SKID
Booster Reset
HOT OIL TRACE BOOSTERS
LARGE HOT OIL TRACE BOOSTER PUMP SOUTH OF TANK 17
Status
HOT OIL TRACE BOOSTER SOUTH OF TANK 17
Status
HOT OIL TRACE BOOSTER NORTH OF SMALL HEATER ON COLUMN
Status
HOT OIL TRACE BOOSTER WEST OF LETDOWN 3 UNDER PIPES
Status
HOT OIL TRACE BOOSTER WEST OF SIEFER MILL ON COLUMN
Status
HOT OIL TRACE BOOSTER ON TOP OF AC RACK
Status
CHECK ALL BRANCH HEATING LINES AND PUMPS FOR OPERATING TEMPERATURES
TANK 19 (PPA SKID)
Status
All Temperatures Acceptable
PAD 1
Temperature
Set Point
PAD 2
Temperature
Set Point
SKID LINES
Temperature
Set Point
INJECTION LINES
Temperature
Set Point
RESET IF RED LIGHTS ARE ILLUMINATED NEXT TO TEMPERATURE CONTROLLERS
Skid Reset
AC TANKS
TANK 1 (58-28)
Status
Temperature Acceptable
TANK 2 (58-28)
Status
Temperature Acceptable
TANK 3 (64-34)
Status
Temperature Acceptable
TANK 4 (EMPTY)
Status
Temperature Acceptable
TANK 5 (58-28)
Status
Temperature Acceptable
TANK 16 (FLUX)
Status
Temperature Acceptable
TANK 17 (64-22)
Status
Temperature Acceptable
ADDITIVE
TANK 18 (P25 EVOTHERM)
Status
Temperature Acceptable
LETDOWNS
LETDOWN 1 (6LD1)
Status
Temperature Acceptable
LETDOWN 2 (7LD2)
Status
Temperature Acceptable
LETDOWN 3 (8)
Status
Temperature Acceptable
LETDOWN 4 (9REACT)
Status
Temperature Acceptable
MIX TANKS
MIX TANK 1
Status
Temperature Acceptable
MIX TANK 2
Status
Temperature Acceptable
EMULSION TANKS
TANK 201
Status
Temperature Acceptable
TANK 202
Status
Temperature Acceptable
TANK 203
Status
Temperature Acceptable
TANK 204
Status
Temperature Acceptable
TANK 205
Status
Temperature Acceptable
TANK 206
Status
Temperature Acceptable
TANK 207
Status
Temperature Acceptable
TANK 208
Status
Temperature Acceptable
TANK 209
Status
Temperature Acceptable
TANK 210
Status
Temperature Acceptable
TANK 211
Status
Temperature Acceptable
TANK 212
Status
Temperature Acceptable
CHEMICAL TANKS
C5 (AA-89)
Status
Temperature Acceptable
C6 (EMPTY)
Status
Temperature Acceptable
C7 (EMPTY)
Status
Temperature Acceptable
C8 (MBG)
Status
Temperature Acceptable
REPORT ANY UNACCEPTABLE TEMPERATURES TO FACILTY MANAGER OR LEAD OPERATOR IMMEDIATELY
L9 (LATEX)
Status
L10 (LATEX)
Status
HCL-11 (HYDROCHLORIC ACID)
Status
SOLUTION TANK 1 (RAPID SET)
Status
SOLUTION TANK 2 (SLOW SET)
Status
HOT WATER TANK
Status
DURING COLD WEAHTHER CLOSE MAIN WATER VALVE AND DRAIN ALL WATER LINES: (HOT, COLD, LOAD RACK, SOLUTION TANK LINES, STATIONARY SAFETY EYEWASH/SHOWER STATIONS)
MISCELLANEOUS
Status
AIR COMPRESSOR
Status
MOBILE EQUIPMENT
Status
Report Condition Of Equipment To Be Corrected Or Repaired
Operator Signature
Click here to sign
AC RACK FANS
Click here to sign
Source: Ergon - (Community Member)