Back
General • Inspections

JLG BOOM LIFTS 600AJ: Function Check

Use this checklist to d to help prevent potential safety issues that could be caused by malfunctioning or damaged equipment. Things like hydraulic failure, stability issues, and other issues that can increase the risk of a tip-over or other safety incident.
MaintainX
10/13/2022

JLG BOOM LIFTS 600AJ: Function Check

Use this checklist to d to help prevent potential safety issues that could be caused by malfunctioning or damaged equipment. Things like hydraulic failure, stability issues, and other issues that can increase the risk of a tip-over or other safety incident.

    Perform the Function Check as follows:

    From the ground control console with no load in the platform:

    From the platform control console:

    With the platform in the stowed position:

    Place the machine in Transport Mode. Ensure machine is positioned in a smooth, firm surface and drive machine with boom elevated beyond 8 horizontal. Ensure drive speed is reduced while operating.

      Skyguard Funtion Test

      From the Platform Console in an area free from obstructions:

      Activate the Skyguard Sensor:

      Once the sensor has been activated, verify the following conditions:

      Note: If a Skyguard is enabled with the Soft Touch system, functions will cut out instead of reversing.

      Note: On machines equipped with Skyline, reattach magnetic end of the cable to the bracket.

    Source: MaintainX (Community Member)

    Please note that any procedure, checklist, or other document available in the MaintainX Procedure Hub is provided for general education and information only and does not constitute legal, medical, or financial advice. MaintainX makes the materials available AS IS and AS PROVIDED, without warranties of any kind. By downloading or using any such materials, you assume the risk that they may not be appropriate for your specific situation and agree that you are solely responsible for any such use, including compliance with applicable law and with meeting any conditions of product warranties.