Back
Manufacturing / Industrial • Maintenance

Doosan D20S-5 Forklift Pneumatic Tire Lift Truck 500 Hours /3 Months

The Doosan D20S-5 Forklift Pneumatic Tire Lift Truck 500 Hours /3 Months procedure inspects your engine for fluid leaks, engine oil level, coolant level and also checks the air cleaner indicator. This form helps in ensuring your forklifts maintains its quality performance.
MaintainX
04/26/2021

Doosan D20S-5 Forklift Pneumatic Tire Lift Truck 500 Hours /3 Months

The Doosan D20S-5 Forklift Pneumatic Tire Lift Truck 500 Hours /3 Months procedure inspects your engine for fluid leaks, engine oil level, coolant level and also checks the air cleaner indicator. This form helps in ensuring your forklifts maintains its quality performance.

    Belts - Check, Adjust

    • 48.PNG

    NOTICE Failure to loosen the alternator mounting bolt (2) will cause excessive stress and break the alternator mounting ear.

    Mast Hinge Pin – Lubricate

    Tilt Cylinders - Check, Adjust, Lubricate

    Chassis Pivot Eye bolts-Lubricate

    Mast Pivot Eyes-Lubricate

    Cylinder Rod Extension-Adjust

    NOTE: The following description is for forward tilt. For cylinder rod back tilt, the collar should be stationary by the tilt eye. If it is not, the O-ring inside the collar may need to be replaced. To adjust back tilt, spacers must be added or removed.

    • 53.PNG

    Crosshead Rollers - Inspect

    Check Operation

    Operate the mast through a lift cycle. Watch the chains move over the crosshead rollers. Make sure the chain is tracking over the rollers properly.

    Transmission Oil Filter – Change

    WARNING:Hot oil and components can cause personal injury. Do not allow hot oil or components to contact skin.

    Park the lift truck level, with the forks lowered, parking brake engaged, direction control lever in NEUTRAL and the engine stopped.

    Overhead Guard – Inspect

    Drive Axle Oil & Strainer - Change, Clean

    Park the lift truck level, with the forks lowered, parking brake engaged, transmission in NEUTRAL and engine stopped.

    • 58.PNG
    • 59.PNG

    Steer Suspension – Inspect

    • 60.PNG
    • 61.PNG

    Parking Brake - Test, Adjust

    Inching & Braking Control Shaft - Lubricate

    Horn and Lights (If Equipped) - Check

Source: Doosan

Please note that any procedure, checklist, or other document available in the MaintainX Procedure Hub is provided for general education and information only and does not constitute legal, medical, or financial advice. MaintainX makes the materials available AS IS and AS PROVIDED, without warranties of any kind. By downloading or using any such materials, you assume the risk that they may not be appropriate for your specific situation and agree that you are solely responsible for any such use, including compliance with applicable law and with meeting any conditions of product warranties.