Back

GEA Compressor Preventive Maintenance

This procedure lists down steps for the inspection and cleaning of your compressor. Using this procedure will help make sure your machine is safe to use, increase efficiency and minimize future damages.
Jake's Finer Foods
04/17/2024

GEA Compressor Preventive Maintenance

This procedure lists down steps for the inspection and cleaning of your compressor. Using this procedure will help make sure your machine is safe to use, increase efficiency and minimize future damages.

    Measure Axial Clearance

    • Pass
    • Flag
    • Fail

    Check Shaft Seal

    • Pass
    • Flag
    • Fail

    Check Primary Slide Movement

    • Pass
    • Flag
    • Fail

    Check Position Indicator Adjustment

    • Pass
    • Flag
    • Fail

    Replace Oil filter if oil differential is above 8.0

    • Pass
    • Flag
    • Fail

    Check Suction Filter

    • Pass
    • Flag
    • Fail

    Change Oil or Oil Quality Analysis (from oil sample results)

    • Pass
    • Flag
    • Fail

    Check the Oil Level

    • Pass
    • Flag
    • Fail

    Inspect Oil Pump

    • Pass
    • Flag
    • Fail

    Replace Seperator Cartridges (if needed)

    • Pass
    • Flag
    • Fail

    Tighten Screws and Connections

    • Pass
    • Flag
    • Fail

    Measure Alignment/Coupling

    • Pass
    • Flag
    • Fail

    Check Functioning of Check Valves

    • Pass
    • Flag
    • Fail

    Check solenoid Valve Capacity Control

    • Pass
    • Flag
    • Fail

    Check Oil Heater

    • Pass
    • Flag
    • Fail

    Lubrication of the Motor

    • Pass
    • Flag
    • Fail

    Clean Motor

    • Pass
    • Flag
    • Fail

    Check Starting Procedures

    • Pass
    • Flag
    • Fail

    Test Safety Devices

    • Pass
    • Flag
    • Fail

    Measure Suction Pressure

    • Pass
    • Flag
    • Fail

    Measure Discharge Pressure

    • Pass
    • Flag
    • Fail

    Measure Oil Pressure

    • Pass
    • Flag
    • Fail

    Measure Suction Temperature

    • Pass
    • Flag
    • Fail

    Measure Discharge Temperature

    • Pass
    • Flag
    • Fail

    Check Oil Injection

    • Pass
    • Flag
    • Fail

    Measure Oil Temperature

    • Pass
    • Flag
    • Fail

    Check Oil Cooling

    • Pass
    • Flag
    • Fail

    Check Power Consumption at Full Load

    • Pass
    • Flag
    • Fail

    Tighten all Bolts on Control Panel

    • Pass
    • Flag
    • Fail

    Check External Piping

    • Pass
    • Flag
    • Fail

    Check Insulation for Damage

    • Pass
    • Flag
    • Fail

    Piping Leakage Test

    • Pass
    • Flag
    • Fail

    Check Oil Seal in Blow Off Valves

    • Pass
    • Flag
    • Fail

    Check External Heat Exchanges

    • Pass
    • Flag
    • Fail

    Measure Coolant Agent Level Inlet Temperature

    • Pass
    • Flag
    • Fail

    Measure Coolant Return Temperature

    • Pass
    • Flag
    • Fail

    Leak Test-Heat Exchange

    • Pass
    • Flag
    • Fail

    Check operation of Oil Return System

    • Pass
    • Flag
    • Fail

    Check Function of Thermometers

    • Pass
    • Flag
    • Fail

    Check Level Indicators

    • Pass
    • Flag
    • Fail

    Check Flow Controls

    • Pass
    • Flag
    • Fail

    Check Function of Regulating Valves

    • Pass
    • Flag
    • Fail

    Check Filter in Liquid line

    • Pass
    • Flag
    • Fail
Source: Jake's Finer Foods (Community Member)

Please note that any procedure, checklist, or other document available in the MaintainX Procedure Hub is provided for general education and information only and does not constitute legal, medical, or financial advice. MaintainX makes the materials available AS IS and AS PROVIDED, without warranties of any kind. By downloading or using any such materials, you assume the risk that they may not be appropriate for your specific situation and agree that you are solely responsible for any such use, including compliance with applicable law and with meeting any conditions of product warranties.