Back

Weekend Inspections Night Shift

Use the guidelines below for the inspection of your oxidizer control panel.
Ahlstrom
04/07/2023

Weekend Inspections Night Shift

Use the guidelines below for the inspection of your oxidizer control panel.

    Date & Time

    Planned work & Breakdowns

    Ammeter Readings

    Carry our reading and log in Folder

    Is Log is up to date

    Oxidiser control panel

    Carry out the following Inspections on the assets listed:

    Test sounder and strobe for operation, pressing the button located on the front of the panel.

    • Pass
    • Flag
    • Fail

    Chlorine units

    Carry out the following Inspections on the assets listed:

    B1 Sump - Removing the stir bar Press the MENU key, then press the down ARROW key until the MAINT menu appears. Press ENTER. Remove the plug from the top hole of the colorimeter. 3 Colorimeter assembly. Gently insert a straightened paper clip into the hole at the top of the colorimeter and slowly pull out the stir bar. Insert a wooden or paper cotton-tipped swab* into the opening and move it up and down with a gentle scrubbing action, cleaning the interior surfaces of the colorimeter cell. Clean the stir ba

    • Pass
    • Flag
    • Fail

    Water Plant - Removing the stir bar Press the MENU key, then press the down ARROW key until the MAINT menu appears. Press ENTER. Remove the plug from the top hole of the colorimeter. 3 Colorimeter assembly. Gently insert a straightened paper clip into the hole at the top of the colorimeter and slowly pull out the stir bar. Insert a wooden or paper cotton-tipped swab* into the opening and move it up and down with a gentle scrubbing action, cleaning the interior surfaces of the colorimeter cell. Clean the st

    • Pass
    • Flag
    • Fail

    Thru air dryer exhaust VSD’s fan and filters

    Carry out the following Inspections on the assets listed:

    TAD 1 – Clean or replace cooling fan filter.

    • Pass
    • Flag
    • Fail

    TAD 2 – Clean or replace cooling fan filter.

    • Pass
    • Flag
    • Fail

    TAD 3 – Clean or replace cooling fan filter.

    • Pass
    • Flag
    • Fail

    Ensure Both Room Fans are in Operation

    • Pass
    • Flag
    • Fail

    Beilomatic

    Carry out the following Inspections on the assets listed:

    Change filters as when required and clean to put back in stores

    • Pass
    • Flag
    • Fail

    Empty oil drip trays as necessary.

    • Pass
    • Flag
    • Fail

    Sump alarm tests

    Carry out the following Inspections on the assets listed:

    Basement – Test sump alarm and ensure fully operational

    • Pass
    • Flag
    • Fail

    Basement Pit – Test sump alarm and ensure fully operational

    • Pass
    • Flag
    • Fail

    Old Mill sump – Test sump alarm and ensure fully operational.

    • Pass
    • Flag
    • Fail

    Corrective Action

    Were any checks incomplete?

    if the answer is "oneOf [Yes]"

    If Not Why Not

    Is any follow up work required?

    if the answer is "oneOf [Yes]"

    Remarks

    Are all guards and their fixing in place, secure and operational? (If NO, state reason)

    if the answer is "oneOf [No]"

    Remarks

    Any Other Comment

Source: Ahlstrom (Community Member)

Please note that any procedure, checklist, or other document available in the MaintainX Procedure Hub is provided for general education and information only and does not constitute legal, medical, or financial advice. MaintainX makes the materials available AS IS and AS PROVIDED, without warranties of any kind. By downloading or using any such materials, you assume the risk that they may not be appropriate for your specific situation and agree that you are solely responsible for any such use, including compliance with applicable law and with meeting any conditions of product warranties.