Back
Manufacturing / Industrial • Inspections

Laser Safety PPE Inspection

Prioritizing and maintaining your Personal Protective Equipment is not merely a precaution but a necessary practice to mitigate potential risks.
Omniduct
03/20/2024

Laser Safety PPE Inspection

Prioritizing and maintaining your Personal Protective Equipment is not merely a precaution but a necessary practice to mitigate potential risks.

    Inspect laser protective window for cleanliness.

    Clean as required with safety glasses wipe.

    • Pass
    • Flag
    • Fail

    Inspect laser protective window for scratches or damage to coating.

    Pay particular attention to possible burns points on window, this indicates a direct hit from the laser reflection. Replace window if coating is damaged.

    • Pass
    • Flag
    • Fail

    Test auto-darkening feature.

    Press test button on the inside of the helmet. Note change in shade.

    • Pass
    • Flag
    • Fail
Source: Omniduct (Community Member)

Please note that any procedure, checklist, or other document available in the MaintainX Procedure Hub is provided for general education and information only and does not constitute legal, medical, or financial advice. MaintainX makes the materials available AS IS and AS PROVIDED, without warranties of any kind. By downloading or using any such materials, you assume the risk that they may not be appropriate for your specific situation and agree that you are solely responsible for any such use, including compliance with applicable law and with meeting any conditions of product warranties.