Back
General • Inspections

KM1012 Bandsaw Procedure

This SOP outlines safety procedures for setup, operation, and maintenance. It includes pre-use checks, safe operation practices like securing workpieces, and post-operation cleanup. Regular maintenance, such as inspecting and replacing the blade, is also covered. Only trained personnel should use the bandsaw, following all safety guidelines.
Conestoga College - SMART Centre
09/30/2024

KM1012 Bandsaw Procedure

This SOP outlines safety procedures for setup, operation, and maintenance. It includes pre-use checks, safe operation practices like securing workpieces, and post-operation cleanup. Regular maintenance, such as inspecting and replacing the blade, is also covered. Only trained personnel should use the bandsaw, following all safety guidelines.

    - Safety glasses to protect against flying debris. - Avoid loose clothing, jewelry, and ensure long hair is tied back.

    • Screenshot2024-09-24135949.png
    • Screenshot2024-09-19114137.png
    • Screenshot2024-09-24142047.png

    - Inspect the bandsaw for blade damage or wear before each use​. - Ensure all guards and covers are in place and functional​. - Secure the workpiece with clamps and avoid holding it by hand. - Verify power supply connection and grounding​.

    - Turn on the machine with the blade away from the workpiece. - Bring the blade closer slowly with your foot on the beige pedal and lifting the lever on the side. - Begin the cut, maintaining a steady feed rate. - Stop the machine and wait for the blade to fully stop before removing the workpiece.

    • camera.jpg

    - Power off the machine. - Clean the area and machine of any debris.

    Refer to the Manual for any further information

Source: Conestoga College - SMART Centre (Community Member)

Please note that any procedure, checklist, or other document available in the MaintainX Procedure Hub is provided for general education and information only and does not constitute legal, medical, or financial advice. MaintainX makes the materials available AS IS and AS PROVIDED, without warranties of any kind. By downloading or using any such materials, you assume the risk that they may not be appropriate for your specific situation and agree that you are solely responsible for any such use, including compliance with applicable law and with meeting any conditions of product warranties.