Back
Manufacturing / Industrial • Maintenance

JUNGHEINRICH EFG 320 Electric Forklifts Truck 1000 Hours/ 6 Months

The JUNGHEINRICH EFG 320 Electric Forklifts Truck 1000 Hours/ 6 Months inspects all components of your forklift truck. Easily identify parts that need repair or replacement by using this procedure.
MaintainX
04/26/2021

JUNGHEINRICH EFG 320 Electric Forklifts Truck 1000 Hours/ 6 Months

The JUNGHEINRICH EFG 320 Electric Forklifts Truck 1000 Hours/ 6 Months inspects all components of your forklift truck. Easily identify parts that need repair or replacement by using this procedure.

    Chassis/ superstructure

    1.7 Check if labels are:

    Drive unit

    2.2 Check the transmission oil level

    2.3 Check pedal mechanism and adjust and grease, if necessary

    Forward motion (single-pedal)

    Make sure that the driving area is free from obstacles.

    Forward motion (dual-pedal)

    Make sure that the driving area is free from obstacles

    Changing the drive direction (single- pedal)

    Before starting to drive in opposite direc- tion you have to make sure, that the rear driving area is free from obstacles

    Changing the drive direction (dual-pedal)

    Before starting to drive in opposite direction you have to make sure, that the rear driving area is free from obstacles.

    Backward motion (single-pedal)

    Make sure that the rear driving area is free from obstacles

    Backward motion (dual-pedal)

    Make sure that the rear driving area is free from obstacles.

    Accelerating the truck (single-pedal)

    Accelerating the truck (dual-pedal)

    Wheels:

    Steering

    Brake system

    5.2 Check the brake linkage;

    5.3 Check the brake lines, connections and brake fluid level

    Brake fluid is poisonous and must only be stored in closed original containers.

    • 20.PNG
    • 21.PNG

    Hydraulic system

    6.3 Check the oil level

    The load lifting device must be completely lowered.

    • 22.PNG
    • 23.PNG
    • 23.PNG

    6.5 Check the hose line for correct functioning and damage

    6.6 Change filter cartridge (hydraulic oil and deaeration filter)

    The hydraulic oil filter is located at the left side of the tilting cylinder and is accessible when the bottom plate is removed.

    • 24.PNG

    Electric system

    Electric motors

    Battery

    Hoist frame

    Demonstration

Source: Jungheinrich

Please note that any procedure, checklist, or other document available in the MaintainX Procedure Hub is provided for general education and information only and does not constitute legal, medical, or financial advice. MaintainX makes the materials available AS IS and AS PROVIDED, without warranties of any kind. By downloading or using any such materials, you assume the risk that they may not be appropriate for your specific situation and agree that you are solely responsible for any such use, including compliance with applicable law and with meeting any conditions of product warranties.