2017 HYSTER J30XNT Pneumatic Tire Forklifts 500 Hours /3 Months
The 2017 HYSTER J30XNT Pneumatic Tire Forklifts 500 Hours /3 Months will help preserve the quality of your Pneumatic Tire Forklift. Perform regular maintenance on to ensure high quiality and safety when using.
2017 HYSTER J30XNT Pneumatic Tire Forklifts 500 Hours /3 Months
The 2017 HYSTER J30XNT Pneumatic Tire Forklifts 500 Hours /3 Months will help preserve the quality of your Pneumatic Tire Forklift. Perform regular maintenance on to ensure high quiality and safety when using.
Drive Tire and Wheel Assemblies
Pedals, Seat Assembly, Hood, Hinges, and Hood Latch
Use Multipurpose Grease
Inspect for:
Breather Cap
Figure 3. Motor Locations, Lift Trucks Manufactured
Manual Override Handle
Use Multipurpose Grease.
Figure 22. Automatic Parking Brake Override Handle
Silicone Spray Lubricant. Hyster P/N 328388.
Master Cylinder Reservoir
Visually check the :
Use Multipurpose Grease.
Mast Mounting Caps crews
Inspection of Mast, Carriage, Header Hoses, Lift Chains, and Attachments
Figure 32. Mast Lubrication
NOTE: MAST IS DIFFERENT, BUT LUBRICATION AREAS ARE THE SAME.
Lift Chains
Visually inspect hoses/fittings for
hydraulic leaks
hose covers for cuts
cracks
exposed reinforcement
defective/broken clamping devices or sheaves
proper tracking during operation
NOTE: Chain anchor pins MUST be replaced any time chains are replaced.
Figure 33. Check the Lift Chains
Adjustments or replacement of the lift chains must be done by authorized personnel.
Header Hoses, Hose Fittings, and Clamps
Inspect for :
Fork Guides and Pins
WARNING: DO NOT try to move a fork without a lifting device. The forks can weigh 45 to 115 kg (99 to 254 lb).
Figure 31. Fork Lock Pin Assembly
Transaxle
Direction and Speed Control Pedals (Use Silicone Spray Lubri- cant. Hyster P/N 328388)
Source: Hyster