Back

Class A Inspection IAW GEA Manual Document GM-4

Use this procedure for the regular inspection and cleaning of your machine to ensure it is safe to use, increase efficiency and minimize repair and damages in the future.
Jake's Finer Foods
04/17/2024

Class A Inspection IAW GEA Manual Document GM-4

Use this procedure for the regular inspection and cleaning of your machine to ensure it is safe to use, increase efficiency and minimize repair and damages in the future.

    Log Machine Properly

    • Pass
    • Flag
    • Fail

    Check Coalescer Pressure Drop

    • Pass
    • Flag
    • Fail

    Take Vibration Readings

    • Pass
    • Flag
    • Fail

    Check Motor Current Draw

    • Pass
    • Flag
    • Fail

    Check Motor Load Control

    • Pass
    • Flag
    • Fail

    Calibrate Pressure Sensors

    • Pass
    • Flag
    • Fail

    Calibrate Temperature Sensors

    • Pass
    • Flag
    • Fail

    Calibrate Motor Current Transformer

    • Pass
    • Flag
    • Fail

    Adjust Load/Unload Solenoid Valve

    • Pass
    • Flag
    • Fail

    Check Axial Float in Male Rotor Shaft

    • Pass
    • Flag
    • Fail

    Check Motor/Compressor Alignment

    • Pass
    • Flag
    • Fail

    Check Operation of all Safeties

    • Pass
    • Flag
    • Fail
Source: Jake's Finer Foods (Community Member)

Please note that any procedure, checklist, or other document available in the MaintainX Procedure Hub is provided for general education and information only and does not constitute legal, medical, or financial advice. MaintainX makes the materials available AS IS and AS PROVIDED, without warranties of any kind. By downloading or using any such materials, you assume the risk that they may not be appropriate for your specific situation and agree that you are solely responsible for any such use, including compliance with applicable law and with meeting any conditions of product warranties.