Back
General • Inspections

Crane Pre-Use Inspection Checklist

This pre-use checklist intends to identify defects and safety hazards before operation. The main aim of a pre-start checklist inspection is to ensure that your equipment is safe to use.
MaintainX
07/15/2022

Crane Pre-Use Inspection Checklist

This pre-use checklist intends to identify defects and safety hazards before operation. The main aim of a pre-start checklist inspection is to ensure that your equipment is safe to use.

    What to Check for During Pre-Operation Inspection

    What to Inspect While the Crane is Moving

    Before lifting any load with a crane, you should always inspect it while it is moving. During this inspection you should be looking out for:

    You should also test that the limit switch is working properly by slowly raising the hook block with no load attached to the hook.

    These pre-operation inspections should only be used as a way to stay on top of typical wear and tear that may lead to required maintenance.

Source: MaintainX (Community Member)

Please note that any procedure, checklist, or other document available in the MaintainX Procedure Hub is provided for general education and information only and does not constitute legal, medical, or financial advice. MaintainX makes the materials available AS IS and AS PROVIDED, without warranties of any kind. By downloading or using any such materials, you assume the risk that they may not be appropriate for your specific situation and agree that you are solely responsible for any such use, including compliance with applicable law and with meeting any conditions of product warranties.