Back

Daily Checks

Go through this checklist everyday and report the results of inspection for pumps, filters, cooling tanks, air hose, resistivity, compressors, fans, heat lamps, air nozzles, etc.
AI Industries
05/10/2024

Daily Checks

Go through this checklist everyday and report the results of inspection for pumps, filters, cooling tanks, air hose, resistivity, compressors, fans, heat lamps, air nozzles, etc.

    Sump pumps 1 and 2 operating

    • Pass
    • Flag
    • Fail

    Filter screen/basket clean

    • Pass
    • Flag
    • Fail

    Discharge pumps 1 and 2 operating

    • Pass
    • Flag
    • Fail

    Basket screen clean on pump 1 and 2

    • Pass
    • Flag
    • Fail

    Water behind line A, B, & C

    • Pass
    • Flag
    • Fail

    All controllers cooling tanks A-6, A-8, A-9, B-16, and B-19 must have same temperature as controllers set point. Tank reading correct.

    • Pass
    • Flag
    • Fail

    All controllers on DI seals tanks A-11, A-13, A-15, B-24 and B-25 must have the same temperature as controllers set point. Tank reading correct.

    • Pass
    • Flag
    • Fail

    All filters pumps should be running

    • Pass
    • Flag
    • Fail

    Hoist for lube line A and C

    • Pass
    • Flag
    • Fail

    Hoist cables for line B are in good condition.

    • Pass
    • Flag
    • Fail

    Hoist chain for line A and C good condition.

    • Pass
    • Flag
    • Fail

    Line A and C air hose check for leaks.

    • Pass
    • Flag
    • Fail

    DI plant for water in storage

    Resistivity must be above 12 MEGAOHMS.

    • Pass
    • Flag
    • Fail

    Mix bed filter lights are on. Bottles 1 and 2.

    • Pass
    • Flag
    • Fail

    Ultra sonic discharge pumps operating.

    • Pass
    • Flag
    • Fail

    Scrubber vent is operating.

    • Pass
    • Flag
    • Fail

    Compressors check for codes.

    • Pass
    • Flag
    • Fail

    Compressors check for alarms.

    • Pass
    • Flag
    • Fail

    B-Blast hoses check for leaks.

    • Pass
    • Flag
    • Fail

    Blower PSI pressure gages working

    • Pass
    • Flag
    • Fail

    Seal fans working.

    • Pass
    • Flag
    • Fail

    PH controller working

    • Pass
    • Flag
    • Fail

    Clean room and final inspection ovens are operating.

    • Pass
    • Flag
    • Fail

    DI Water Plant - Check fittings, filters, valves, pipes for cracks/water leaks

    • Pass
    • Flag
    • Fail

    Light Bulbs In all Buildings & All Rooms

    • Pass
    • Flag
    • Fail

    All Heat Lamps (screens, burnt bulbs, etc.)

    • Pass
    • Flag
    • Fail

    All Air Nozzles (Rubber tip, air leaks, loose handle, etc.)

    • Pass
    • Flag
    • Fail

    Add your comments

    Any pictures?

    Add or drag pictures

    Signature

    Click here to sign
Source: AI Industries (Community Member)

Please note that any procedure, checklist, or other document available in the MaintainX Procedure Hub is provided for general education and information only and does not constitute legal, medical, or financial advice. MaintainX makes the materials available AS IS and AS PROVIDED, without warranties of any kind. By downloading or using any such materials, you assume the risk that they may not be appropriate for your specific situation and agree that you are solely responsible for any such use, including compliance with applicable law and with meeting any conditions of product warranties.