Clicker Building
Building inspections are crucial for ensuring safety, complying with codes, preventing costly repairs, and maintaining property value, especially for commercial buildings.
Gabbs - Premier Magnesia
03/13/2025
Clicker Building
Building inspections are crucial for ensuring safety, complying with codes, preventing costly repairs, and maintaining property value, especially for commercial buildings.
Procedure Max Score: 450
Auditor Names:
Responsible Manager/Supervisor for Follow-up:
Stairs, Walkways, and Roadways
Are designated walkways kept clear of debris and equipment?
Are floor areas below electrical panels and safety equipment kept clear for ready access?
Are walkways and stairways free of equipment, parts, tools, and debris?
Are all roadways clear of debris?
Are there handrails on all stairways and are they in good repair?
Color Coding Requirements
Are machinery guards painted yellow?
Are stationary fire extinguisher locations red?
Is equipment identified with numbers and, where necessary, with descriptions?
Lighting
Are faulty lights being replaced? No more than 10% of "Lights Out".
Are all lighting fixtures secure and lenses and/or bulbs clear of dust and debris?
Are light fixtures guarded to prevent shock or burn to employees?
Machine Guarding
Are all machine guards in place and properly secure?
Are all machine guards adequate for protecting personnel?
Are all points of machine operation with exposure to employee injury properly guarded?
Are lubrication lines extended so as to allow lubrication from a safe location?
Hand Tools
Are hand tools in proper working order?
Are tools clean/properly stored and organized?
Are the handles of shovels, hoes, and similar tools made of wood or fiberglass?
Housekeeping
Is the area free of debris such as rags, cans, hoses, tools, etc.?
Are floors clean and clear of build-up?
Are handrails, guards, and equipment clean and painted?
Is the area free of parts and materials, or are they stored properly?
Are trash can/dumpster lids in place and being closed?
Fire Prevention Systems and Equipment
Is there any accumulation of flammable materials?
Are all exits and access points to the fire escapes and fire fighting equipment clear of obstructions?
Are all fire extinguishers' monthly inspections current and initialed?
Are fire extinguishers mounted correctly
Electrical Systems and Welders
Is all electrical equipment appropriately guarded and labeled?
Are principle power switches labeled to show which units they control?
Are electrical rooms clean and orderly?
Is fixed equipment permanently grounded and permanently wired?
Are all outlet and junction covers properly affixed in place?
Are all electrical panel doors properly closed and secure?
Are Combustibles being stored on electrical panels?
Operator Controls
Is the White board being updated and hazards being tracked?
Conveyor Belts and Screws
Are screw casings in good repair and not leaking material?
Are lids clamped down and sealed not allowing material/dust to leak out?
Are the screws fligts exposed?
Are the bearing properly guarded?
Are the lids of screws being used as a step over?
Are the screws making noises?
Stairs, Walkways
2 Floor
Are designated walkways kept clear of debris and equipment?
Are walkways and stairways free of equipment, parts, tools, and debris?
Are adequate handrails, midrails, and toe boards installed on elevated walkways and platforms?
Are there handrails on all stairways and are they in good repair?
Color Coding Requirements
Are machinery guards painted yellow?
Are stationary fire extinguisher locations red?
Is equipment identified with numbers and, where necessary, with descriptions?
Lighting
Are faulty lights being replaced? No more than 10% of "Lights Out".
Are all lighting fixtures secure and lenses and/or bulbs clear of dust and debris?
Are light fixtures guarded to prevent shock or burn to employees?
Machine Guarding
Are all machine guards in place and properly secure?
Are all machine guards adequate for protecting personnel?
Are all points of machine operation with exposure to employee injury properly guarded?
Are lubrication lines extended so as to allow lubrication from a safe location?
Hand Tools
Are tools clean/properly stored and organized?
Are the handles of shovels, hoes, and similar tools made of wood or fiberglass?
Housekeeping
Is the area free of debris such as rags, cans, hoses, tools, etc.?
Are floors clean and clear of build-up?
Are handrails, guards, and equipment clean and painted?
Is the area free of parts and materials, or are they stored properly?
Fire Prevention Systems and Equipment
Is there any accumulation of flammable materials?
Are all exits and access points to the fire escapes and fire fighting equipment clear of obstructions?
Are all fire extinguishers' monthly inspections current and initialed?
Are fire extinguishers mounted correctly
Electrical Systems
Is all electrical equipment appropriately guarded and labeled?
Are principle power switches labeled to show which units they control?
Are all outlet and junction covers properly affixed in place?
Are Combustibles being stored on electrical panels?
Conveyor Belts and Screws
Are screw casings in good repair and not leaking material?
Are lids clamped down and sealed not allowing material/dust to leak out?
Are the screws fligts exposed?
Are the bearing properly guarded?
Are the lids of screws being used as a step over?
Stairs, Walkways
3 Floor
Are designated walkways kept clear of debris and equipment?
Are floor areas below electrical panels and safety equipment kept clear for ready access?
Are walkways and stairways free of equipment, parts, tools, and debris?
Are adequate handrails, midrails, and toe boards installed on elevated walkways and platforms?
Color Coding Requirements
Are machinery guards painted yellow?
Are stationary fire extinguisher locations red?
Is equipment identified with numbers and, where necessary, with descriptions?
Lighting
Are faulty lights being replaced? No more than 10% of "Lights Out".
Are all lighting fixtures secure and lenses and/or bulbs clear of dust and debris?
Are light fixtures guarded to prevent shock or burn to employees?
Machine Guarding
Are all machine guards in place and properly secure?
Are all machine guards adequate for protecting personnel?
Are all points of machine operation with exposure to employee injury properly guarded?
Are lubrication lines extended so as to allow lubrication from a safe location?
Housekeeping
Is the area free of debris such as rags, cans, hoses, tools, etc.?
Are floors clean and clear of build-up?
Are handrails, guards, and equipment clean and painted?
Conveyor Belts and Screws
Are screw casings in good repair and not leaking material?
Are lids clamped down and sealed not allowing material/dust to leak out?
Are the screws fligts exposed?
Are the bearing properly guarded?
Are the lids of screws being used as a step over?
Are the screws making noises?
Stairs, Walkways
4 Floor
Are designated walkways kept clear of debris and equipment?
Are walkways and stairways free of equipment, parts, tools, and debris?
Are adequate handrails, midrails, and toe boards installed on elevated walkways and platforms?
Are there handrails on all stairways and are they in good repair?
Color Coding Requirements
Are machinery guards painted yellow?
Are stationary fire extinguisher locations red?
Is equipment identified with numbers and, where necessary, with descriptions?
Lighting
Are faulty lights being replaced? No more than 10% of "Lights Out".
Are all lighting fixtures secure and lenses and/or bulbs clear of dust and debris?
Are light fixtures guarded to prevent shock or burn to employees?
Machine Guarding
Are all machine guards in place and properly secure?
Are all machine guards adequate for protecting personnel?
Are all points of machine operation with exposure to employee injury properly guarded?
Are lubrication lines extended so as to allow lubrication from a safe location?
Housekeeping
Is the area free of debris such as rags, cans, hoses, tools, etc.?
Are floors clean and clear of build-up?
Are handrails, guards, and equipment clean and painted?
Is the area free of parts and materials, or are they stored properly?
Electrical Systems
Is all electrical equipment appropriately guarded and labeled?
Is fixed equipment permanently grounded and permanently wired?
Are all outlet and junction covers properly affixed in place?
Are Combustibles being stored on electrical panels?
Conveyor Belts and Screws
Are screw casings in good repair and not leaking material?
Are lids clamped down and sealed not allowing material/dust to leak out?
Are the screws fligts exposed?
Are the bearing properly guarded?
Are the lids of screws being used as a step over?
Are the screws making noises?
Stairs, Walkways
5 Floor
Are designated walkways kept clear of debris and equipment?
Are walkways and stairways free of equipment, parts, tools, and debris?
Are adequate handrails, midrails, and toe boards installed on elevated walkways and platforms?
Are there handrails on all stairways and are they in good repair?
Color Coding Requirements
Are machinery guards painted yellow?
Are stationary fire extinguisher locations red?
Is equipment identified with numbers and, where necessary, with descriptions?
Lighting
Are faulty lights being replaced? No more than 10% of "Lights Out".
Are all lighting fixtures secure and lenses and/or bulbs clear of dust and debris?
Are light fixtures guarded to prevent shock or burn to employees?
Machine Guarding
Are all machine guards in place and properly secure?
Are all machine guards adequate for protecting personnel?
Are all points of machine operation with exposure to employee injury properly guarded?
Are lubrication lines extended so as to allow lubrication from a safe location?
Housekeeping
Is the area free of debris such as rags, cans, hoses, tools, etc.?
Are floors clean and clear of build-up?
Are handrails, guards, and equipment clean and painted?
Is the area free of parts and materials, or are they stored properly?
Conveyor Belts and Screws
Are screw casings in good repair and not leaking material?
Are lids clamped down and sealed not allowing material/dust to leak out?
Are the screws fligts exposed?
Are the bearing properly guarded?
Are the lids of screws being used as a step over?
Are the screws making noises?
Stairs, Walkways
6 Floor
Are designated walkways kept clear of debris and equipment?
Are walkways and stairways free of equipment, parts, tools, and debris?
Are adequate handrails, midrails, and toe boards installed on elevated walkways and platforms?
Are there handrails on all stairways and are they in good repair?
Color Coding Requirements
Are machinery guards painted yellow?
Are stationary fire extinguisher locations red?
Is equipment identified with numbers and, where necessary, with descriptions?
Lighting
Are faulty lights being replaced? No more than 10% of "Lights Out".
Are all lighting fixtures secure and lenses and/or bulbs clear of dust and debris?
Are light fixtures guarded to prevent shock or burn to employees?
Machine Guarding
Are all machine guards in place and properly secure?
Are all machine guards adequate for protecting personnel?
Are all points of machine operation with exposure to employee injury properly guarded?
Are lubrication lines extended so as to allow lubrication from a safe location?
Housekeeping
Is the area free of debris such as rags, cans, hoses, tools, etc.?
Are floors clean and clear of build-up?
Are handrails, guards, and equipment clean and painted?
Is the area free of parts and materials, or are they stored properly?
Fire Prevention Systems and Equipment
Is there any accumulation of flammable materials?
Are all exits and access points to the fire escapes and fire fighting equipment clear of obstructions?
Are all fire extinguishers' monthly inspections current and initialed?
Are fire extinguishers mounted correctly
Electrical Systems
Is all electrical equipment appropriately guarded and labeled?
Are principle power switches labeled to show which units they control?
Is fixed equipment permanently grounded and permanently wired?
Are all outlet and junction covers properly affixed in place?
Are all electrical panel doors properly closed and secure?
Are Combustibles being stored on electrical panels?
Stairs, Walkways
7 Floor
Are designated walkways kept clear of debris and equipment?
Are walkways and stairways free of equipment, parts, tools, and debris?
Are adequate handrails, midrails, and toe boards installed on elevated walkways and platforms?
Are there handrails on all stairways and are they in good repair?
Color Coding Requirements
Are machinery guards painted yellow?
Are stationary fire extinguisher locations red?
Is equipment identified with numbers and, where necessary, with descriptions?
Lighting
Are faulty lights being replaced? No more than 10% of "Lights Out".
Are all lighting fixtures secure and lenses and/or bulbs clear of dust and debris?
Are light fixtures guarded to prevent shock or burn to employees?
Machine Guarding
Are all machine guards in place and properly secure?
Are all machine guards adequate for protecting personnel?
Are all points of machine operation with exposure to employee injury properly guarded?
Are lubrication lines extended so as to allow lubrication from a safe location?
Housekeeping
Is the area free of debris such as rags, cans, hoses, tools, etc.?
Are floors clean and clear of build-up?
Are handrails, guards, and equipment clean and painted?
Is the area free of parts and materials, or are they stored properly?
Conveyor Belts and Screws
Are screw casings in good repair and not leaking material?
Are lids clamped down and sealed not allowing material/dust to leak out?
Are the screws fligts exposed?
Are the bearing properly guarded?
Are the lids of screws being used as a step over?
Are the screws making noises?
Stairs, Walkways
8 Floor
Are designated walkways kept clear of debris and equipment?
Are walkways and stairways free of equipment, parts, tools, and debris?
Are adequate handrails, midrails, and toe boards installed on elevated walkways and platforms?
Are there handrails on all stairways and are they in good repair?
Color Coding Requirements
Are machinery guards painted yellow?
Are stationary fire extinguisher locations red?
Is equipment identified with numbers and, where necessary, with descriptions?
Lighting
Are faulty lights being replaced? No more than 10% of "Lights Out".
Are all lighting fixtures secure and lenses and/or bulbs clear of dust and debris?
Are light fixtures guarded to prevent shock or burn to employees?
Machine Guarding
Are all machine guards in place and properly secure?
Are all machine guards adequate for protecting personnel?
Are all points of machine operation with exposure to employee injury properly guarded?
Are lubrication lines extended so as to allow lubrication from a safe location?
Housekeeping
Is the area free of debris such as rags, cans, hoses, tools, etc.?
Are floors clean and clear of build-up?
Are handrails, guards, and equipment clean and painted?
Is the area free of parts and materials, or are they stored properly?
Electrical Systems and Welders
Is all electrical equipment appropriately guarded and labeled?
Are principle power switches labeled to show which units they control?
Is fixed equipment permanently grounded and permanently wired?
Are all outlet and junction covers properly affixed in place?
Are all electrical panel doors properly closed and secure?
Are Combustibles being stored on electrical panels?
Source: Gabbs - Premier Magnesia (Community Member)