Back
Manufacturing / Industrial • Inspections

Daily Horizontal Bandsaw Maintenance

Objective is to leave the machine in excellent and clean operating condition when finished using the machine.
Edlund Co.
11/10/2022

Daily Horizontal Bandsaw Maintenance

Objective is to leave the machine in excellent and clean operating condition when finished using the machine.

    Cleaning Chips from Working Areas of the Machine

    chips will pile up behind the wheels - these must be cleaned out for proper operation.

    • knuth_8.jpg
    • knuth_2.jpg
    • knuth_10.jpg
    • knuth_7.jpg
    • knuth_6.jpg
    • knuth_5.jpg

    Lubrication

    Inspection

    Coolant and air lines in proper locations and operating conditions?

    • Pass
    • Flag
    • Fail

    Manometer is set between 190-210 bar?

    • knuth_4.jpg
    • Pass
    • Flag
    • Fail
Source: Edlund Co. (Community Member)

Please note that any procedure, checklist, or other document available in the MaintainX Procedure Hub is provided for general education and information only and does not constitute legal, medical, or financial advice. MaintainX makes the materials available AS IS and AS PROVIDED, without warranties of any kind. By downloading or using any such materials, you assume the risk that they may not be appropriate for your specific situation and agree that you are solely responsible for any such use, including compliance with applicable law and with meeting any conditions of product warranties.