Back
Manufacturing / Industrial • Maintenance

Cleaver Brooks C1X Economizer 750-266 CONDENSING ECONOMIZER Maintenance

MaintainX
04/26/2021

Cleaver Brooks C1X Economizer 750-266 CONDENSING ECONOMIZER Maintenance

    NOTE: Ensure that the combustion source is off and is cool, and the economizer is cool before attempting to inspect or clean the fin coil(s).

    The following is the procedure for opening and closing large doors on CRE units. NOTE: it may be necessary to provide a means of supporting the weight of the door.

    *The adjusting bolt feature is not incorporated on the smaller hinged doors.

    NOTE: Often there is sufficient draft at the stack above the exchanger which can blow the soot off the fins and carry it out the stack.

Source: Cleaver Brooks

Please note that any procedure, checklist, or other document available in the MaintainX Procedure Hub is provided for general education and information only and does not constitute legal, medical, or financial advice. MaintainX makes the materials available AS IS and AS PROVIDED, without warranties of any kind. By downloading or using any such materials, you assume the risk that they may not be appropriate for your specific situation and agree that you are solely responsible for any such use, including compliance with applicable law and with meeting any conditions of product warranties.