Allied Z-Series (3 - 6 ZCA): Regular Maintenance
This procedure focuses on Condenser oils, E-Supply Blower Wheels, and Lubrication. The main purpose of regular maintenance is to ensure that all equipment required for production is operating at 100% efficiency at all times.
MaintainX
08/24/2022
Allied Z-Series (3 - 6 ZCA): Regular Maintenance
This procedure focuses on Condenser oils, E-Supply Blower Wheels, and Lubrication. The main purpose of regular maintenance is to ensure that all equipment required for production is operating at 100% efficiency at all times.
A-Filters
Units are equipped with temporary filters which must be replaced prior to building occupation. See table 13 for correct filter size. Refer to local codes or appropriate jurisdiction for approved filters..
NOTE-Filters must be U.L.C. certified or equivalent for use in Canada.
To change filters, open filter access panel on back side of unit. See figure 13. Lift filter stop to remove filters. See figure 14.
B-Lubrication
All motors are lubricated at the factory. No further lubrication is required.
Source: MaintainX (Community Member)