Crown Narrow-Aisle Reach Trucks ESR 1000: Charging Power Sources

Before Charging Power Sources

• Read the instructions for the charger and power sources.

• Make sure that the charger has the correct voltage and amperage for the power source.

• When charging power sources, use only charges approved for the power source.

• Only charge a power source in an authorized area.

Charging a Flooded Lead Acid Battery

• Turn off your truck.

• Unplug the power source connector from the truck.

• Follow the charging instructions from the power source manufacturer. When charging is complete, unplug the charger and plug the power source connector into the truck.

Charging a V-Force Lithium-ion Battery

• Turn off your truck.

• Plug the charger into the battery charge port.

• Follow the charging instructions for the V-Force lithium-ion battery.

• Opportunity charge during breaks or whenever the truck is not being used.

• When opportunity charging is complete or the battery is fully charged, unplug the charger from the battery charge port.