Back

Chairlift Pre Start-up Inspection (Ski Resort)

You can use this procedure and start with a visual inspection. Check for excessive wear, missing parts, and anything out of the ordinary. It's also a good idea to look for hydraulic leaks and worn hoses that could damage the jobsite or cause the lift to malfunction.
2 MX Main Demo
07/05/2022

Chairlift Pre Start-up Inspection (Ski Resort)

You can use this procedure and start with a visual inspection. Check for excessive wear, missing parts, and anything out of the ordinary. It's also a good idea to look for hydraulic leaks and worn hoses that could damage the jobsite or cause the lift to malfunction.

    Temperature

    Wind

    Weather

    Opening Time

    Closing Time

    Hour Meter Reading

    Chairlift Inspection

    Safety Circuit Ok

    • Pass
    • Flag
    • Fail

    Anti-Rollback Stopped

    • Pass
    • Flag
    • Fail

    Counterweight Clearances

    • Pass
    • Flag
    • Fail

    Evacuation Drive Chain

    • Pass
    • Flag
    • Fail

    Evacuation Motor Oil Level

    • Pass
    • Flag
    • Fail

    Evacuation Motor Fuel Level

    • Pass
    • Flag
    • Fail

    Crank Evacuation Motor

    • Pass
    • Flag
    • Fail

    Start Evacuation Motor (Minutes)

    Chairlift Gearbox Dr. Levels

    • Pass
    • Flag
    • Fail

    Check Chairlift Line

    • Pass
    • Flag
    • Fail

    Check Service Brake

    • Pass
    • Flag
    • Fail

    Check Emergency Brake

    • Pass
    • Flag
    • Fail

    Check for Ice Build Up

    • Pass
    • Flag
    • Fail

    Start Chair on Slow

    • Pass
    • Flag
    • Fail

    Operate on Run

    • Pass
    • Flag
    • Fail

    Check Call Buzzers

    • Pass
    • Flag
    • Fail

    Check Safety Switches (bott)

    • Pass
    • Flag
    • Fail

    Check “slow” Control (bott)

    • Pass
    • Flag
    • Fail

    Check “run” Buttons (bott)

    • Pass
    • Flag
    • Fail

    Check Safety Gate (top)

    • Pass
    • Flag
    • Fail

    Check Safety Switches (top)

    • Pass
    • Flag
    • Fail

    Check “slow” Control (top)

    • Pass
    • Flag
    • Fail

    Communication

    • Pass
    • Flag
    • Fail

    Anti-Rollback Running

    • Pass
    • Flag
    • Fail

    Check Splice

    • Pass
    • Flag
    • Fail

    Unloading Ramp

    • Pass
    • Flag
    • Fail

    Signs – Top

    • Pass
    • Flag
    • Fail

    Signs – Bottom

    • Pass
    • Flag
    • Fail

    Observe Chairs

    • Pass
    • Flag
    • Fail

    Fire Extinguisher

    • Pass
    • Flag
    • Fail

    Evacuation Rope

    • Pass
    • Flag
    • Fail

    Maze

    • Pass
    • Flag
    • Fail

    Emerg. Brake Stop Distance

    • Pass
    • Flag
    • Fail

    Service Brake Stop Distance

    • Pass
    • Flag
    • Fail

    Service Brake Torque

    • Pass
    • Flag
    • Fail

    Max Stop Distance 10.5’

    • Pass
    • Flag
    • Fail

    Min 2’4” at 340 ft/min

    • Pass
    • Flag
    • Fail

    Any Additional Comments

    Supervisor/Operator

    Click here to sign

    Manager

    Click here to sign
Source: 2 MX Main Demo (Community Member)

Please note that any procedure, checklist, or other document available in the MaintainX Procedure Hub is provided for general education and information only and does not constitute legal, medical, or financial advice. MaintainX makes the materials available AS IS and AS PROVIDED, without warranties of any kind. By downloading or using any such materials, you assume the risk that they may not be appropriate for your specific situation and agree that you are solely responsible for any such use, including compliance with applicable law and with meeting any conditions of product warranties.