Back

Class B Inspection IAW GEA Manual Document GM-4

The inspection, conducted in accordance with GEA Manual Document GM-4, will also include the completion of a Class A inspection simultaneously.
Jake's Finer Foods
04/17/2024

Class B Inspection IAW GEA Manual Document GM-4

The inspection, conducted in accordance with GEA Manual Document GM-4, will also include the completion of a Class A inspection simultaneously.

    Generator quarterly inspection

    Warning: Only qualified personnel should perform this inspection.

    Check the condition of the generator enclosure.

    • Pass
    • Flag
    • Fail

    Inspect the condition of the control panel and ensure it is functioning correctly.

    • Pass
    • Flag
    • Fail

    Record the generator's hour meter reading.

    Meter name
    Unit

    Inspect the drive belts for wear and tension.

    • Pass
    • Flag
    • Fail

    Check the coolant heater for proper operation.

    • Pass
    • Flag
    • Fail

    Inspect the air filter for cleanliness and replace if necessary.

    • Pass
    • Flag
    • Fail

    Check the oil level and replace or top up as required.

    • Pass
    • Flag
    • Fail

    Inspect the fuel system for leaks and proper fuel level.

    • Pass
    • Flag
    • Fail

    Check the exhaust system for leaks, damage, and proper mounting.

    • Pass
    • Flag
    • Fail

    Inspect the alternator and starter for proper operation.

    • Pass
    • Flag
    • Fail

    Verify that the generator is in AUTO mode.

    • Pass
    • Flag
    • Fail

    Check all electrical connections for tightness and signs of corrosion.

    • Pass
    • Flag
    • Fail

    Ensure that the surrounding area is clean and free of debris.

    • Pass
    • Flag
    • Fail

    Inspector's signature confirming the completion of the inspection.

    Click here to sign

    Section #1

    Class B inspection

    Inspect Skid for Rust and Corrosion

    • Pass
    • Flag
    • Fail

    Clean Suction Strainer

    • Pass
    • Flag
    • Fail

    Clean Liquid Injection Valve

    • Pass
    • Flag
    • Fail

    Inspect all External Refrigerant Lines

    • Pass
    • Flag
    • Fail

    Leak Check Machine Properly

    • Pass
    • Flag
    • Fail

    Inspect Motor Terminals

    • Pass
    • Flag
    • Fail

    Grease Motor Bearings

    • Pass
    • Flag
    • Fail

    Check all Connections in Starter

    • Pass
    • Flag
    • Fail

    Inspect Condition of Contactors

    • Pass
    • Flag
    • Fail

    Check Relays in Starter and Control Panel

    • Pass
    • Flag
    • Fail

    Check Timers in Starter and Control Panel

    • Pass
    • Flag
    • Fail

    Check Starter & Control Panel for Proper Operations

    • Pass
    • Flag
    • Fail

    Change Oil if Warranted by Analysis

    • Pass
    • Flag
    • Fail

    Replace Oil Filter

    • Pass
    • Flag
    • Fail

    Inspect Coalescer Elements

    • Pass
    • Flag
    • Fail

    Clean Oil Pump Suction Strainer

    • Pass
    • Flag
    • Fail

    Check Oil Pump Alignment

    • Pass
    • Flag
    • Fail

    Inspect all External Oil Lines

    • Pass
    • Flag
    • Fail

    Check Oil Pressure Regulator

    • Pass
    • Flag
    • Fail

    Check Operation of Oil Return System

    • Pass
    • Flag
    • Fail

    Check Operation of Oil Heater

    • Pass
    • Flag
    • Fail
Source: Jake's Finer Foods (Community Member)

Please note that any procedure, checklist, or other document available in the MaintainX Procedure Hub is provided for general education and information only and does not constitute legal, medical, or financial advice. MaintainX makes the materials available AS IS and AS PROVIDED, without warranties of any kind. By downloading or using any such materials, you assume the risk that they may not be appropriate for your specific situation and agree that you are solely responsible for any such use, including compliance with applicable law and with meeting any conditions of product warranties.