Manufacturing / Industrial • Inspections

Laser Chiller Monthly

A monthly inspection of a laser chiller is crucial to ensure its optimal performance and longevity. Regularly performing these inspections can help prevent unexpected breakdowns and extend the life of your laser chiller.

ACO Arizona

01/10/2025

Laser Chiller Monthly

Check Water Level

Check water level in tank to be within E-F - Fill with Distilled water ONLY..

Clean Condenser Filters - per page 23

Blow off and clean outer filters and blow condenser coils clean of dust.

Check Water Filter - per page 27

Inspect water filter gauge has not increased by 0.07 MPa over original PSI. Replace as needed per Instructions on page 27.

Check Deionizer - per page 26

Check ION exchange resin. conductivity is less than 15 us/cm. Notify if not for Work Order creation.

Check water condition

Inspect for sludge build up on tank liner, any foreign matter in tank. or abnormal water.

Source: ACO Arizona (Community Member)

Check Water Level

Check water level in tank to be within E-F - Fill with Distilled water ONLY..

Clean Condenser Filters - per page 23

Blow off and clean outer filters and blow condenser coils clean of dust.

Check Water Filter - per page 27

Inspect water filter gauge has not increased by 0.07 MPa over original PSI. Replace as needed per Instructions on page 27.

Check Deionizer - per page 26

Check ION exchange resin. conductivity is less than 15 us/cm. Notify if not for Work Order creation.

Check water condition

Inspect for sludge build up on tank liner, any foreign matter in tank. or abnormal water.