Grindmaster Beverage Freezer Annual Cleaning Form

This annual cleaning form for the Grindmaster Beverage Freezer is a straight-forward, step-by-step cleaning procedure to help maintain the quality of your equipment.

MaintainX

04/26/2021

Grindmaster Beverage Freezer Annual Cleaning Form

This annual cleaning form for the Grindmaster Beverage Freezer is a straight-forward, step-by-step cleaning procedure to help maintain the quality of your equipment.

Cleaning Procedure

Disconnect electrical power
Clean condenser
Remove dispensing valve assembly and replace all O-Rings
Remove dasher assembly, inspect stator bearings and replace shaft seal set
Remove rear panel and inspect "V" belt
Inspect the drive shaft square hole for wear (rounding-out)
Check drive shaft and motor shaft bearings for excessive wear
Reinstall side and back panels
Re-connect power supply

Source: Grindmaster

Cleaning Procedure

Disconnect electrical power

Clean condenser

Remove dispensing valve assembly and replace all O-Rings

Remove dasher assembly, inspect stator bearings and replace shaft seal set

Remove rear panel and inspect "V" belt

Inspect the drive shaft square hole for wear (rounding-out)

Check drive shaft and motor shaft bearings for excessive wear

Reinstall side and back panels

Re-connect power supply