Back
Food & Beverage / Retail • Maintenance

Frymaster Universal Holding Cabinet (UHC)

The Frymaster Universal Holding Cabinet (UHC) is used to maintain the effectiveness of the heater plate and to reduce the risk of cross contamination. The complete instructions are available so you can follow the step-by-step procedure.
MaintainX
04/26/2021

Frymaster Universal Holding Cabinet (UHC)

The Frymaster Universal Holding Cabinet (UHC) is used to maintain the effectiveness of the heater plate and to reduce the risk of cross contamination. The complete instructions are available so you can follow the step-by-step procedure.

    Clean air exhaust fan and driver board Annual PR 50 A1-T

    Why

    To maintain proper cooling of electronic components

    Time required

    Time of day

    Hazard icons

    • Screenshot.png

    Procedure

    1 Perform all UHC daily maintenance procedures.

    Do not attempt to clean a hot UHC.

    2 Unplug UHC power cord.

    Failure to unplug the power at the wall outlet could result in serious injury or death. The power switch on the UHC does not disconnect all incoming power to the cabinet.

    3 Remove side panels.

    4 Brush dust from circuit boards.

    5 Access exhaust fan.

    Tip: You do not need to disconnect the switch wiring when you pull the fascia out.

    Disassembling and cleaning the UHC requires at least 2 people.

    6 Clean air exhaust fan blades.

    Sanitizer solution, McD APSC

    7 Replace shelf, fascia, side panels, and top panels.

Source: Frymaster

Please note that any procedure, checklist, or other document available in the MaintainX Procedure Hub is provided for general education and information only and does not constitute legal, medical, or financial advice. MaintainX makes the materials available AS IS and AS PROVIDED, without warranties of any kind. By downloading or using any such materials, you assume the risk that they may not be appropriate for your specific situation and agree that you are solely responsible for any such use, including compliance with applicable law and with meeting any conditions of product warranties.