Frymaster Universal Holding Cabinet-High Density Models UHC-HD
The Frymaster Universal Holding Cabinet-High Density is used to maintain the effectiveness of the heater plate and to reduce the risk of cross contamination. The complete instructions are available so you can follow the step-by-step procedure.
Frymaster Universal Holding Cabinet-High Density Models UHC-HD
The Frymaster Universal Holding Cabinet-High Density is used to maintain the effectiveness of the heater plate and to reduce the risk of cross contamination. The complete instructions are available so you can follow the step-by-step procedure.
Frymaster Universal Holding Cabinet-High Density Models UHC-HD
Clean air exhaust fans* and driver board Annual PR50
Why
To maintain proper cooling of electronic components
Time required
Time of day
Hazard icons
Tools and supplies
Procedure
QUALIFIED TECHNICIANS ONLY
1 Perform all UHC daily maintenance procedures.
Do not attempt to clean a hot UHC.
2 Unplug UHC power cord.
Failure to unplug the power at the wall outlet could result in serious injury or death. The power switch on the UHC does not disconnect all incoming power to the cabinet
3 Remove side panels.
4 Brush dust from circuit boards.
5 Access exhaust fan*.
*Fans are not present in the natural convection (flat top) units.
If removing the cabinet from its fixed position for disassembling and cleaning, the UHC requires at least 2 people.
6 Clean air exhaust fan blades*.
*Fans are not present in the natural convection (flat top) units.
Sanitizer solution, McD APSC
7 Replace top and side panels.
Source: Frymaster