Thermatron Monthly Preventive Maintenance
This procedure will guide you on the proper inspection of your Thermatron equipment including but not limited to its straps, bolts and nuts, covers, shield contacts, base plate, relays, press leveling, insulator assembly carbon tracks and the overall condition of the equipment.
Kenosha - Filtration Group Finishing
03/22/2024
Thermatron Monthly Preventive Maintenance
This procedure will guide you on the proper inspection of your Thermatron equipment including but not limited to its straps, bolts and nuts, covers, shield contacts, base plate, relays, press leveling, insulator assembly carbon tracks and the overall condition of the equipment.
Inspect overall condition of equipment
Inspect brass / bronze conducting straps for breaks, cracks, or sharp creases
Check And Tighten Any Nuts Or Bolts That May Have Become Loose
Use torque screwdriver to check for loose hardware
Check for good metaltometal contact between all high frequency components and between removable covers, shield contacts, and base plate
Relays and contactors should be checked for freedom of operation
Check the press leveling and support bolts and tighten if become loose
The electrode should be thoroughly examined
The insulator assembly between the hot electrode and upper platen should be thoroughly examined and cleaned
Source: Kenosha - Filtration Group Finishing (Community Member)