Back

Bi-Monthly Evapco Pre-Filter Service

This is the Service Schedule for the Evapco Pre-Filters according to Manufacturer Recommendations. It is important to establish a regular maintenance program and be sure that the program is followed. This bulletin should be used as a guide to establish a good maintenance program for your equipment.
Florida Beef Inc
02/27/2025

Bi-Monthly Evapco Pre-Filter Service

This is the Service Schedule for the Evapco Pre-Filters according to Manufacturer Recommendations. It is important to establish a regular maintenance program and be sure that the program is followed. This bulletin should be used as a guide to establish a good maintenance program for your equipment.

    Warning: This maintenance check requires trained personnel with PPE!

    Fan motor stopped and locked out using the disconnect switch

    • Pass
    • Flag
    • Fail

    Prefilters removed from their individual holding frame

    • Pass
    • Flag
    • Fail

    Filter frame gasketing, caulking between the frames and holding clips inspected and replaced if necessary

    • Pass
    • Flag
    • Fail

    Prefilter section cleaned and sanitized

    • Pass
    • Flag
    • Fail

    New prefilters installed with the pleats in the vertical position if possible

    • Pass
    • Flag
    • Fail

    Fan motor started

    • Pass
    • Flag
    • Fail

    Prefilters checked after approximately 8 hours of operation to ensure that they have been installed properly

    • Pass
    • Flag
    • Fail

    Maintenance schedule for the unit updated

    • Pass
    • Flag
    • Fail

    Sign off on the Evapco Pre-Filter Service

    Click here to sign
Source: Florida Beef Inc (Community Member)

Please note that any procedure, checklist, or other document available in the MaintainX Procedure Hub is provided for general education and information only and does not constitute legal, medical, or financial advice. MaintainX makes the materials available AS IS and AS PROVIDED, without warranties of any kind. By downloading or using any such materials, you assume the risk that they may not be appropriate for your specific situation and agree that you are solely responsible for any such use, including compliance with applicable law and with meeting any conditions of product warranties.