BUNN AXIOM-35-3 Brewwise Cleaning Form

Cleaning Procedure

• The use of a damp cloth rinsed in any mild, nonabrasive, liquid detergent is recommended for cleaning all surfaces on Bunn-O-Matic equipment

• Open the sprayhead holes

• Insert the short end of the sprayhead cleaning tool into each of the five water outlets of the plastic sprayhead to remove any mineral deposits

• Insert the long end of sprayhead cleaning tool into the sprayhead fitting, and rotate several times to remove any mineral deposits from the fitting

Tank Drain Cleaning Procedure

• Loosen screws that secure the front access panel then remove the panel

• Unfasten the hose clamp at the end of the drain hose then remove the plug

• Place the end of the drain hose in a container that has a minimum capacity of 200 oz (5.9 L)

• Release the white clamp to drain water from the tank

• When tank is empty, close the white clamp, replace the plug, and tighten the clamp at the end of the drain hose

• Replace the front panel and tighten screws