MAKE-UP ROOM DAILY PM

OVERALL ROOM CONDITION

• CHECK TEMPERATURE OF ROOM

• CHECK CEILING AND WALLS FOR CONDENSATION, MOLD, PEELING PAINT OR CAULKING

• CHECK FLOOR FOR TRIP HAZARDS, NUTS/BOLTS

DIOSNA MIXER

• CHECK OPERATION OF MIXER. UP/DOWN, CLAMPING

• CHECK FOR ERRORS ON HMI

• CHECK FOR LEAKY PIPES

ZEPPLIN

• CHECK OVERALL FUNCTIONALITY

• LOOK FOR FLOUR LEAKS IN PIPING OR HOPPER AREA

• CHECK FOR LEAKY PIPES

TOPOS MIXER

• LOOK FOR LEAKS IN JACKET

• CHECK SOCK BETWEEN HOPPER AND MIXER FOR TEARS AND TIGHTNESS

• CHECK FLOOR BOLTS FOR LOOSENESS

• CHECK HMI FOR ANY ERRORS

BREADLINE DIVIDER

• CHECK DIVIDER FOR PROPER AIR PSI

• CHECK DIVIDER FOR ANY LOOSE BOLTS, MISSING PARTS UNDER FRONT AND BACK COVERS.

• CHECK DIVIDER BELT FOR TEARS

BREADLINE ROUNDER

• CHECK ROUNDER FOR DAMAGE AROUND CONE/GROOVES

• CHECK DUSTER FOR OPERATION. GAP BETWEEN ROLLER AT OPENING CLEAR?

OVERHEAD PROOFERS

• CHECK BASKETS, ANY HANGING DOWN?

• DOORS LATCHED, SAFETIES WORKING?

• CHECK FAN FOR OPERATION

CONVEYORS

• CHECK FOR BROKEN LINKS/TEARS/SAGGING/JUMPING/SKIPPING

• CHECK WEAR STRIPS/RAILS FOR BROKEN, MISSING, UNLODGED PIECES.

• CHECK FOR UNUSUAL NOISE

STAMPER

• CHECK FOR PROPER OPERATION

• CHECK SPRING RETURN

• CHECK BRUSHES FOR CONTACT ON CONES

PRESSURE PLATES

• CHECK FOR LOOSE OR TORN COVERS/BELTS

• CHECK FOR OPERATION OF LANERS. DOES ADJUSTMENT MOVE EASILY?

• CHECK BELT RUN UNDER PLATES. TRACKING.

RECIPRICATING BELT

• CHECK FOR TEARS, HOLES, STRINGS

• CHECK FOR TRACKING. CHECK CYLINDER FOR OPERATION. TRACKING CENTERED?

• CHECK RECIP RUN OUT. IS IT ROUGH?

• CHECK NOSE ROLLERS. DO THEY TURN?

DOUGH LIFTS

• CHECK FOR OPERATION. DO LIMIT SWITCHES MAKE?

• CHECK CONTROLS. ANY BUTTONS MISSING, NOT WORKING?

• CHECK LIFT RAILS. BEARINGS OK? ARE THEY IN TRACK?

• CHECK SCREW FOR ANY OBSTRUCTIONS