Manufacturing / Industrial • Inspections

Ingersoll UP6S 11-22 kW Oil-Flooded Rotary Screw Compressors (Dryer Option): General Maintenance

This procedure ensures that the following are checked accordingly so your equipment performs at its best for a long period of time: Pressure Relieve Valve, Tank Drain Valve, Pressure Switch, to name a few

ABC

08/11/2023

Ingersoll UP6S 11-22 kW Oil-Flooded Rotary Screw Compressors (Dryer Option): General Maintenance

The moisture separator will operate indefinitely under normal working conditions, however at some time it may be necessary to replace the seals should the housing leak.

Isolate the housing from the air supply

Fully depressurize in drain bowl as appropriate.

Check condition of bowl seal and replace if necessary. Clean screw threads.

The autodrain assembly is not serviceable and must be replaced if faulty

Refit bowl with ’O’ ring seal

Repressurize and check for leaks. If leaks occur they will most probably be from the bowl ’O’ ring. Depressurize housing and remove ’O’ ring as stated above and inspect and clean. Ensure that mating surfaces are clean and then refit ’O’ ring and pressurize again.

AIR FILTER MAINTENANCE

Source: ABC (Community Member)