Food & Beverage / Retail • Maintenance

Silver King Portion Control Cream Dispenser SKMCD1P Cream Dispenser Maintenance

A very useful maintenance form for the Silver King Portion Control Cream Dispenser as it provides a photo for each procedure. From the removal of the valve to inserting a new bag and pressing the refill button, this form has the complete instructions.

MaintainX

04/26/2021

Silver King Portion Control Cream Dispenser SKMCD1P Cream Dispenser Maintenance

A very useful maintenance form for the Silver King Portion Control Cream Dispenser as it provides a photo for each procedure. From the removal of the valve to inserting a new bag and pressing the refill button, this form has the complete instructions.

Cleaning and Refilling Procedures

Removing Valve Insert

To remove the valve insert once the beverage container is empty, simply press on the valve slide and remove the valve insert by pulling it straight up.

Cleaning

Once removed, the valve can be cleaned with a brush and warm soapy water or in a dishwasher. The valve area in the dispenser should also be cleaned with a brush and warm soapy water.

Insert New Bag into Container

Insert a new beverage bag into the container as shown.

Lock the tube into place at the bottom of the container.

Cleaning and Refilling Procedures

Install Container and Bag

Place container inside cabinet and guide tube through valve area.

Be sure the tube is straight and centered to avoid kinking, which could result in reduced product flow or leaking.

Install Valve Insert

Cut Tube

Cut the tube one inch below the valve.

Press REFILL Button

Press and hold the REFILL button for 3 seconds (display 00) to alert the dispenser that a new beverage bag has been installed.

Source: Silver King (www.manualslib.com)