Back
Food & Beverage / Retail • Maintenance

Manitowoc Blend-In-Cup® (BIC) Manual Fill Beverage System Weekly Maintenance

The Manitowoc Blend-In-Cup® (BIC) Manual Fill Beverage System Daily Maintenance Form offers a complete list of weekly maintenance for the Manual Fill Beverage System. There's a photo provided for each instruction for easier understanding.
MaintainX
04/26/2021

Manitowoc Blend-In-Cup® (BIC) Manual Fill Beverage System Weekly Maintenance

The Manitowoc Blend-In-Cup® (BIC) Manual Fill Beverage System Daily Maintenance Form offers a complete list of weekly maintenance for the Manual Fill Beverage System. There's a photo provided for each instruction for easier understanding.

    NOTE: The following procedures are the basic weekly cleaning instructions, on-screen instructions can vary depending on the recipe that was created with the MenuConnect program or options chosen in the Managers Menu.

    *These items are optional and may not be displayed on all easyToUCH screens during ZONE 2 Cleaning.

    Time to complete - 90 Minutes

    NOTE: An additional 1 hour 45 minutes will be needed if the Sanitizing Ice bin option is enabled in the Managers Menu.

    • 1.PNG
    • 1.PNG

    NOTE: Failure to complete the weekly cleaning sequence entirely will not reset the weekly cleaning timer and will require the process to be repeated.

    GATHER THE FOLLOWING SUPPLIES

    Follow the on-screen instructions and gather the following supplies:

    NOTE: If other cleaners are used, it is possible they will not clean or sanitize your machine to NSF standards.

    PRODUCT LINE CLEANING & SANITIZING

    At Back Room Sink

    Put on gloves & safety glasses

    Prepare Cleaning Solutions

    Follow the on screen instructions and fill each labeled bucket to the fill line with the appropriate solution and bring to machine.

    Whip Cream Door *, Gasket Seals, & Drip Tray

    • 1.PNG

    Washing Instructions

    • 1.PNG

    Spray and wipe refrigerator surfaces with new sanitized clean cloth, including each

    Connect Cleaning Tubes

    • 1.PNG

    Rinse Lines

    • 1.PNG

    Sanitize Lines

    • 1.PNG

    Whip Cream Door *, Gasket Seals, & Drip Tray

    • 1.PNG

    Purging Lines

    • 1.PNG

    NOTE: Air is pushed through each line (slot) blowing out any remaining liquid, displaying the progress on the screen, 30 seconds per slot. When purging has completed the Reinstall Inventory Screen will appear automatically

    Reinstall Inventory

    • 1.PNG

    NOTE: This will automatically prime each line with product. The screen will read Priming Slot X. Each slot will change from Purged to Primed. When priming has completed the Prime Completion Screen will appear automatically.

    Auto Prime Complete

    • 1.PNG

    Important : Do Not pour down the drain on the BIC unit!

    Empty Ice Bin

    Warning: Sharp Objects/Surfaces - Beware of the shaver blade located in the bottom of the ice bin.

    • 1.PNG

    Dispense Remaining Ice

    NOTE: Ice will not dispense if ice bin lid is not in place.

    Ice Bin Wash

    • 1.PNG

    Warning: When in contact with cleaning and sanitizing solution chemicals gloves and safety glasses are recommended.

    NOTE: Do not put in dishwasher or power soaker.

    • 1.PNG
    • 1.PNG
    • Capture.PNG

    BLENDERS / DISPENSE AREA CLEANING & SANITIZING

    Grate Removal / Blender Station Wash

    Warning: The blender station contains sharp moving parts. Wear gloves to protect hands.

    Follow the on screen instructions:

    Put on gloves and safety glasses.*

    • Capture.PNG

    Blender Door Removal

    • 1.PNG

    Blender Station Wash

    • 1.PNG

    Clean Blender Shaft Bushing

    • 1.PNG

    Wash Blender Grate(s) / Door(s)

    • 1.PNG

    Warning : When in contact with cleaning and sanitizing solution chemicals gloves and safety glasses are recommended.

    Reinstall Blender Door(s)

    • 1.PNG

    Reinstall Blender Grate(s)

    • 1.PNG

    Blender Wash

    • 1.PNG
    • 1.PNG
    • 1.PNG

    Blender Sanitizing

    • 1.PNG
    • 1.PNG
    • 1.PNG

    Blender Station Sanitizing

    Warning: The blender station contains sharp moving parts. Wear gloves to protect hands.

    • 1.PNG

    Whipped Cream Door Cleaning *

    • 1.PNG

    Dispense Area Cleaning

    ,Caution: Do Not Insert a brush or sharp object into the red dispense nozzles.

    • 1.PNG

    Dispensing Area Sanitizing

    • 1.PNG

    NOTE: The touch screen will return to the Main Menu screen if Drain Cleaning is not active.

    DRAIN CLEANING - BIO-SHIELD® (OPTIONAL)

    *Only for units with this feature. These steps will only display during the ZONE 2 Cleaning on units with this feature turned on in the loaded recipe file. If this feature is not active, the interface will automatically proceed to “Weekly Cleaning Complet

    Prepare Unit for Drain Cleaning

    • 1.PNG

    Prepare Drain Cleaning Solution

    • 1.PNG

    Mix Drain Cleaning Solution

    Important: When in contact with drain cleaning chemicals gloves and safety glasses are recommended.

    • 1.PNG

    Drain Cleaning

    • 1.PNG

    Post Drain Cleaning

    • 1.PNG

    Reinstall Grate(s) / Door(s)

    • 1.PNG

    Important: Drain cleaner is most effective when left for four (4) hours, but the machine can be used as needed.

    • 1.PNG
Source: Manitowoc (www.partstown.com)

Please note that any procedure, checklist, or other document available in the MaintainX Procedure Hub is provided for general education and information only and does not constitute legal, medical, or financial advice. MaintainX makes the materials available AS IS and AS PROVIDED, without warranties of any kind. By downloading or using any such materials, you assume the risk that they may not be appropriate for your specific situation and agree that you are solely responsible for any such use, including compliance with applicable law and with meeting any conditions of product warranties.