Back
Manufacturing / Industrial • Inspections

PM Solenoid - 250-300 Core Staking

Use this procedure for the monthly preventive maintenance of your machine's core-C frame assembly and inspection of it specific components.
SOPT Maintenance
11/09/2023

PM Solenoid - 250-300 Core Staking

Use this procedure for the monthly preventive maintenance of your machine's core-C frame assembly and inspection of it specific components.

    DISCONNECT ENERGY, INSTALL THE TAGOUT LOCK !!!

    A GOOD JOB IS CRUCIAL PART OF YOUR PROFESSIONAL IMPROVEMENT/GROW

    PLEASE MAKE SURE TO FOLLOW THIS MAINTENANCE RUTINE/INSTRUCTION

    1. Core – C-Frame ASSEMBLY

    1.1- Items to check and correct if needed at the station:

    -Trays

    • Pass
    • Flag
    • Fail

    -Servo sensors:

    • Pass
    • Flag
    • Fail

    - Servo controller:

    • Pass
    • Flag
    • Fail

    -Cables and cylinders/part presence sensors:

    • Pass
    • Flag
    • Fail

    -Shock absorbers and mechanical stops:

    • Pass
    • Flag
    • Fail

    -Valves:

    • Pass
    • Flag
    • Fail

    1.8 Check cylinders alignment (vertical and horizontal axes). Adjust if needed:

    1.9 Check Air Nozzle System and clean filter.

    Inspect the correct functionality of the following Items:

    -Interlock on door :

    • Pass
    • Flag
    • Fail

    -E-Stop Button:

    • Pass
    • Flag
    • Fail

    -Additional notes:

    Signature:

    Click here to sign
Source: SOPT Maintenance (Community Member)

Please note that any procedure, checklist, or other document available in the MaintainX Procedure Hub is provided for general education and information only and does not constitute legal, medical, or financial advice. MaintainX makes the materials available AS IS and AS PROVIDED, without warranties of any kind. By downloading or using any such materials, you assume the risk that they may not be appropriate for your specific situation and agree that you are solely responsible for any such use, including compliance with applicable law and with meeting any conditions of product warranties.