Back
Manufacturing / Industrial • Inspections

Bi-weekly Cleaning and Maintenance Procedure Ambaflex Spiral Conveyor

Spiral Conveyor Maintenance involves the regular checking and upkeep of the various components of the conveyor system to ensure they are functioning correctly. This includes the shaftless spiral, liners, troughs, and the direct drive. The controls must be designed to prevent unintended accumulation and prevent product back-ups in the spiral.
Groveport - Radial
02/06/2024

Bi-weekly Cleaning and Maintenance Procedure Ambaflex Spiral Conveyor

Spiral Conveyor Maintenance involves the regular checking and upkeep of the various components of the conveyor system to ensure they are functioning correctly. This includes the shaftless spiral, liners, troughs, and the direct drive. The controls must be designed to prevent unintended accumulation and prevent product back-ups in the spiral.

    Bi-weekly Cleaning and Maintenance Procedure

    • BiWeekly3.PNG
    • Daily2.PNG
    • BiWeekly5.PNG
    • BiWeekly6.PNG
    • BiWeekly7.PNG

    Check the chain tension. Remove a link once the chain has an over-length of 38.5 mm.

    • ChainTension.PNG
    • Pass
    • Flag
    • Fail

    Check the sprocket for worn teeth and alignment, replace or align the sprocket if necessary. Misalignment of the sprocket can result in permanent wear or can result in the chain coming off the sprocket, which can cause a serious blockage.

    • Pass
    • Flag
    • Fail

    Check the side guides for dents, damage, and alignment. Replace the guides if they damage the products. Contact the supplier about this.

    • Pass
    • Flag
    • Fail

    Check for missing or damaged O-belts on the transition rollers and reversing rollers. Replace if necessary.

    • Pass
    • Flag
    • Fail

    Check the transition roller for imbalance and smooth running of the bearings.

    • Pass
    • Flag
    • Fail

    Check the drive for oil leaks and noise. Repair or clean if necessary. See the troubleshooting list.

    • Pass
    • Flag
    • Fail

    Check that the motor reductor is securely fastened to the machine, tighten the bolts if necessary. Vibrations in the drive can loosen the conveyor plates. Incorrect alignment can bend the shaft and/or can result in the chain coming off the sprocket.

    • Pass
    • Flag
    • Fail

    Check the motor reductor oil level, top up if necessary. Refer to the manufacturer’s motor-reductor specifications.

    • AmbaflexGearOil.png
    • Pass
    • Flag
    • Fail
    • Lube.PNG

    Sign off on the preventative maintenance

    Click here to sign
Source: Groveport - Radial (Community Member)

Please note that any procedure, checklist, or other document available in the MaintainX Procedure Hub is provided for general education and information only and does not constitute legal, medical, or financial advice. MaintainX makes the materials available AS IS and AS PROVIDED, without warranties of any kind. By downloading or using any such materials, you assume the risk that they may not be appropriate for your specific situation and agree that you are solely responsible for any such use, including compliance with applicable law and with meeting any conditions of product warranties.